Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2000-10-01 → 2000-10-31 |
| MCL | Health-based | Resolved | 2000-10-01 → 2000-10-31 |
| MCL | Health-based | Resolved | 2000-10-01 → 2000-10-31 |
| MCL | Health-based | Resolved | 2000-10-01 → 2000-10-31 |
| MCL | Health-based | Resolved | 1996-09-01 → 1996-09-30 |
| MCL | Health-based | Resolved | 1996-09-01 → 1996-09-30 |
| MCL | Health-based | Resolved | 1996-09-01 → 1996-09-30 |
| MCL | Health-based | Resolved | 1996-09-01 → 1996-09-30 |
| MCL | Health-based | Resolved | 1996-09-01 → 1996-09-30 |
| MCL | Health-based | Resolved | 1996-09-01 → 1996-09-30 |
PFAS detected
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 209.75 µg/L 16% of the EPA limit 1300 µg/L
worst single sample: 302 µg/L | 122/122 | SYR4 | 2014–2019 |
| Lead | 6.7655 µg/L 45% of the EPA limit 15 µg/L
worst single sample: 26.6 µg/L | 78/122 | SYR4 | 2014–2019 |
| Nitrate | 5092 µg/L 51% of the EPA limit 10000 µg/L
worst single sample: 5320 µg/L | 64/66 | SYR4 | 2012–2019 |
| Bromodichloromethane | 5.562 µg/L No EPA limit set
worst single sample: 8.24 µg/L | 45/45 | SYR4 | 2012–2019 |
| Chloroform | 7.014 µg/L No EPA limit set
worst single sample: 10 µg/L | 45/45 | SYR4 | 2012–2019 |
| Dibromochloromethane | 4.04 µg/L No EPA limit set
worst single sample: 6.59 µg/L | 45/45 | SYR4 | 2012–2019 |
| TTHM | 16.775 µg/L 21% of the EPA limit 80 µg/L
worst single sample: 26.5 µg/L | 43/43 | SYR4 | 2012–2019 |
| Bromoform | 1.2385 µg/L No EPA limit set
worst single sample: 1.67 µg/L | 32/45 | SYR4 | 2012–2019 |
| Lead | 0.0023 mg/L 15% of the EPA limit 0.0150 mg/L | 25/25 | LCR | 2026 |
| Total Haloacetic Acids (HAA5) | 6.197 µg/L 10% of the EPA limit 60 µg/L
worst single sample: 6.986 µg/L | 16/43 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 3.9256 µg/L No EPA limit set
worst single sample: 3.963 µg/L | 12/43 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 2.6345 µg/L No EPA limit set
worst single sample: 3.091 µg/L | 11/43 | SYR4 | 2012–2019 |
| Nitrate-Nitrite | 5065 µg/L 51% of the EPA limit 10000 µg/L
worst single sample: 5110 µg/L | 4/4 | SYR4 | 2012 |
| Barium | 62.54 µg/L 3.1% of the EPA limit 2000 µg/L
worst single sample: 62.9 µg/L | 2/2 | SYR4 | 2014–2017 |
| Fluoride | 1260 µg/L 32% of the EPA limit 4000 µg/L
worst single sample: 1280 µg/L | 2/2 | SYR4 | 2014–2017 |
| Trichloroacetic Acid | 1.618 µg/L No EPA limit set | 1/43 | SYR4 | 2012–2019 |
85 contaminants tested, none detected
Utility contact
Frequently asked questions about Trenton City
Is Trenton City tap water safe to drink?
EPA monitoring detected 18 contaminants in Trenton City's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Trenton City's water?
EPA monitoring detected Copper, Lead, Nitrate, Bromodichloromethane, Chloroform, and others. The full list with the level and data source for each is above.
How many people does Trenton City serve?
Trenton City reports serving 13,012 people in Ohio, per its EPA record.
Has Trenton City had any water quality violations?
The EPA has 86 violations on file for Trenton City, of which 40 are health-based (a contaminant limit or required treatment was breached) and 1 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.