← Ohio

Tap water quality report

Bellaire Public Water

EPA monitoring tested this supplier for 82 contaminants and detected 23. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

82
contaminants tested
23
detected
4,278
people served
76
health-based violations
Water source
Surface water
Ownership
Local government
Counties served
Belmont

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

76
health-based violations
339
violations on file
3
still open
ViolationTypeStatusPeriod
TT Health-based Resolved 2014-02-01 → 2014-02-28
TT Health-based Resolved 2014-02-01 → 2014-02-28
TT Health-based Resolved 2014-02-01 → 2014-02-28
TT Health-based Resolved 2014-02-01 → 2014-02-28
TT Health-based Resolved 1995-09-01 → 1995-09-30
TT Health-based Resolved 1995-09-01 → 1995-09-30
TT Health-based Resolved 1995-09-01 → 1995-09-30
TT Health-based Resolved 1995-09-01 → 1995-09-30
MCL Health-based Resolved 1995-05-01 → 1995-05-31
MCL Health-based Resolved 1995-05-01 → 1995-05-31

PFAS detected

PFAS are industrial “forever chemicals”. These are the EPA's latest nationwide test results (2023–2025).
ContaminantMaxDetection ratePeriod
PFBS 0.0038 µg/L 2/4 2024

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Nitrate
2962.5 µg/L 30%
of the EPA limit 10000 µg/L
worst single sample: 3500 µg/L
196/198 SYR4 2012–2019
Nitrate-Nitrite
3050 µg/L 31%
of the EPA limit 10000 µg/L
worst single sample: 3500 µg/L
81/82 SYR4 2012–2018
Chloroform
10.58 µg/L
No EPA limit set
worst single sample: 20.2 µg/L
45/50 SYR4 2012–2019
Bromodichloromethane
15.79 µg/L
No EPA limit set
worst single sample: 17.8 µg/L
44/50 SYR4 2012–2019
Copper
11 µg/L 0.8%
of the EPA limit 1300 µg/L
worst single sample: 399 µg/L
41/101 SYR4 2012–2019
Tetrachloroethylene
4.26 µg/L 85%
of the EPA limit 5 µg/L
worst single sample: 13.5 µg/L
39/72 SYR4 2012–2019
Dibromochloromethane
16.525 µg/L
No EPA limit set
worst single sample: 18.8 µg/L
36/51 SYR4 2012–2019
Bromoform
6.435 µg/L
No EPA limit set
worst single sample: 8.27 µg/L
31/50 SYR4 2012–2019
Lead
0.0 mg/L 0%
of the EPA limit 0.0150 mg/L
26/26 LCR 2026
Dichloroacetic Acid
5.87 µg/L
No EPA limit set
worst single sample: 7 µg/L
25/28 SYR4 2012–2019
TTHM
52.99 µg/L 66%
of the EPA limit 80 µg/L
worst single sample: 62.3 µg/L
20/28 SYR4 2012–2019
Dibromoacetic Acid
5.19 µg/L
No EPA limit set
worst single sample: 5.4 µg/L
15/28 SYR4 2012–2019
Total Haloacetic Acids (HAA5)
11.04 µg/L 18%
of the EPA limit 60 µg/L
worst single sample: 12.3 µg/L
15/28 SYR4 2012–2019
Trichloroacetic Acid
4.025 µg/L
No EPA limit set
worst single sample: 4.79 µg/L
11/28 SYR4 2012–2019
Fluoride
1327 µg/L 33%
of the EPA limit 4000 µg/L
worst single sample: 1390 µg/L
7/7 SYR4 2012–2018
Lead
7.946 µg/L 53%
of the EPA limit 15 µg/L
worst single sample: 9.2 µg/L
5/101 SYR4 2012–2019
Mercury
1.86 µg/L 93%
of the EPA limit 2 µg/L
worst single sample: 1.9 µg/L
2/10 SYR4 2012–2018
Arsenic
3.1 µg/L 31%
of the EPA limit 10 µg/L
1/7 SYR4 2012–2018
Cyanide
8 µg/L 4%
of the EPA limit 200 µg/L
1/7 SYR4 2012–2018
Monobromoacetic Acid
1.1 µg/L
No EPA limit set
1/28 SYR4 2012–2019
Nitrite
460 µg/L 46%
of the EPA limit 1000 µg/L
1/82 SYR4 2012–2018
Trichloroethylene
0.6700 µg/L 13%
of the EPA limit 5 µg/L
1/72 SYR4 2012–2019
59 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaAntimony, TotalAtrazineBariumBenzeneBeryllium, TotalChlorobenzeneCadmiumCarbon TetrachlorideChromiumDichloromethaneEthylbenzeneHfpo-DaLassoMonochloroacetic AcidNetfosaaNfdhaNmefosaaPfbaPfdaPfdoaPfeesaPfhpaPfhpsPfhxaPFHXSPfmbaPfmpaPFNAPFOAPFOSPfpeaPfpesPftaPftrdaPfunaSeleniumSimazineStyreneThallium, TotalTolueneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneLithiumO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
MARLING, EDWARD
Phone
740-296-6490
Email
[email protected]

Frequently asked questions about Bellaire Public Water

Is Bellaire Public Water tap water safe to drink?

EPA monitoring detected 23 contaminants in Bellaire Public Water's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Bellaire Public Water's water?

EPA monitoring detected Nitrate, Nitrate-Nitrite, Chloroform, Bromodichloromethane, Copper, and others. The full list with the level and data source for each is above.

How many people does Bellaire Public Water serve?

Bellaire Public Water reports serving 4,278 people in Ohio, per its EPA record.

Has Bellaire Public Water had any water quality violations?

The EPA has 339 violations on file for Bellaire Public Water, of which 76 are health-based (a contaminant limit or required treatment was breached) and 3 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.