Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2005-07-01 → 2005-09-30 |
| MCL | Health-based | Resolved | 2005-07-01 → 2005-09-30 |
| MCL | Health-based | Resolved | 2005-07-01 → 2005-09-30 |
| MCL | Health-based | Resolved | 2005-07-01 → 2005-09-30 |
| MCL | Health-based | Resolved | 2005-07-01 → 2005-09-30 |
| MCL | Health-based | Resolved | 2005-04-01 → 2005-06-30 |
| MCL | Health-based | Resolved | 2005-04-01 → 2005-06-30 |
| MCL | Health-based | Resolved | 2005-04-01 → 2005-06-30 |
| MCL | Health-based | Resolved | 2005-04-01 → 2005-06-30 |
| MCL | Health-based | Resolved | 2005-04-01 → 2005-06-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 217.4 µg/L 17% of the EPA limit 1300 µg/L
worst single sample: 368 µg/L | 88/160 | SYR4 | 2012–2019 |
| Lead | 0.0017 mg/L 11% of the EPA limit 0.0150 mg/L | 20/20 | LCR | 2025 |
| Bromodichloromethane | 26.175 µg/L No EPA limit set
worst single sample: 28.3 µg/L | 18/18 | SYR4 | 2012–2019 |
| Bromoform | 4.345 µg/L No EPA limit set
worst single sample: 8 µg/L | 18/18 | SYR4 | 2012–2019 |
| Chloroform | 24.905 µg/L No EPA limit set
worst single sample: 25.5 µg/L | 18/18 | SYR4 | 2012–2019 |
| Dibromochloromethane | 19.755 µg/L No EPA limit set
worst single sample: 28 µg/L | 18/18 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 8.65 µg/L No EPA limit set
worst single sample: 9.5 µg/L | 18/18 | SYR4 | 2012–2019 |
| TTHM | 73.475 µg/L 92% of the EPA limit 80 µg/L
worst single sample: 79 µg/L | 18/18 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 16.29 µg/L 27% of the EPA limit 60 µg/L
worst single sample: 16.8 µg/L | 18/18 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 3.247 µg/L No EPA limit set
worst single sample: 3.4 µg/L | 18/18 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 5.64 µg/L No EPA limit set
worst single sample: 6.9 µg/L | 15/18 | SYR4 | 2012–2019 |
| Lead | 17.38 µg/L 116% of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 19 µg/L | 5/160 | SYR4 | 2012–2019 |
| Monobromoacetic Acid | 1 µg/L No EPA limit set | 1/18 | SYR4 | 2012–2019 |
31 contaminants tested, none detected
Utility contact
Frequently asked questions about Sunday Creek Valley Water
Is Sunday Creek Valley Water tap water safe to drink?
EPA monitoring detected 13 contaminants in Sunday Creek Valley Water's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Sunday Creek Valley Water's water?
EPA monitoring detected Copper, Lead, Bromodichloromethane, Bromoform, Chloroform, and others. The full list with the level and data source for each is above.
How many people does Sunday Creek Valley Water serve?
Sunday Creek Valley Water reports serving 5,451 people in Ohio, per its EPA record.
Has Sunday Creek Valley Water had any water quality violations?
The EPA has 70 violations on file for Sunday Creek Valley Water, of which 37 are health-based (a contaminant limit or required treatment was breached) and 3 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.