Is Williamson Town Wd Tap Water Safe? Quality Report

Water source: Surface water
Ownership: Local government
Counties served: Wayne

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

health-based violations

violations on file

still open

Violation	Type	Status	Period
TT	Health-based	Resolved	2008-04-01 → 2008-06-30
TT	Health-based	Resolved	2008-04-01 → 2008-06-30
TT	Health-based	Resolved	2008-04-01 → 2008-06-30
TT	Health-based	Resolved	2008-04-01 → 2008-06-30
MCL	Health-based	Resolved	2006-08-01 → 2006-08-31
MCL	Health-based	Resolved	2006-08-01 → 2006-08-31
MCL	Health-based	Resolved	2006-08-01 → 2006-08-31
MCL	Health-based	Resolved	2006-08-01 → 2006-08-31
MCL	Health-based	Resolved	2005-10-01 → 2005-10-31
MCL	Health-based	Resolved	2005-10-01 → 2005-10-31

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.

Contaminant	Level vs EPA limit	Detection rate	Source	Period
Fluoride	1070 µg/L 27% of the EPA limit 4000 µg/L worst single sample: 7000 µg/L	87/88	SYR4	2012–2019
Bromodichloromethane	16 µg/L No EPA limit set worst single sample: 18 µg/L	59/59	SYR4	2012–2019
Chloroform	39.1 µg/L No EPA limit set worst single sample: 46 µg/L	59/59	SYR4	2012–2019
Dibromochloromethane	6.72 µg/L No EPA limit set worst single sample: 7.2 µg/L	59/59	SYR4	2012–2019
Dichloroacetic Acid	19.5 µg/L No EPA limit set worst single sample: 30 µg/L	59/59	SYR4	2012–2019
TTHM	60.4 µg/L 76% of the EPA limit 80 µg/L worst single sample: 71 µg/L	59/59	SYR4	2012–2019
Total Haloacetic Acids (HAA5)	40.1 µg/L 67% of the EPA limit 60 µg/L worst single sample: 57 µg/L	59/59	SYR4	2012–2019
Trichloroacetic Acid	22.2 µg/L No EPA limit set worst single sample: 28 µg/L	57/59	SYR4	2012–2019
Dibromoacetic Acid	4 µg/L No EPA limit set worst single sample: 7.3 µg/L	21/59	SYR4	2012–2019
Nitrate	580 µg/L 5.8% of the EPA limit 10000 µg/L	16/16	SYR4	2012–2019
Monochloroacetic Acid	5.48 µg/L No EPA limit set worst single sample: 8.6 µg/L	14/59	SYR4	2012–2019
Lead	0.0012 mg/L 8% of the EPA limit 0.0150 mg/L	10/10	LCR	2023
Barium	158.6 µg/L 7.9% of the EPA limit 2000 µg/L worst single sample: 230 µg/L	8/8	SYR4	2012–2019
Bromoform	3 µg/L No EPA limit set	7/59	SYR4	2012–2019
Chromium	3.125 µg/L 3.1% of the EPA limit 100 µg/L worst single sample: 3.3 µg/L	6/8	SYR4	2012–2019
Monobromoacetic Acid	3.44 µg/L No EPA limit set worst single sample: 3.8 µg/L	4/59	SYR4	2012–2019
Antimony, Total	0.5800 µg/L 9.7% of the EPA limit 6 µg/L	1/8	SYR4	2012–2019
Combined Radium (-226 And -228)	0.2400 pCi/L 4.8% of the EPA limit 5 pCi/L	1/1	SYR4	2012
Thallium, Total	0.5000 µg/L 25% of the EPA limit 2 µg/L	1/8	SYR4	2012–2019

85 contaminants tested, none detected

1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS2,3,7,8-TCDD2,4,5-TP2,4-D4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaArsenicAsbestosAtrazineBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalChlorobenzeneCyanideCadmiumCarbofuranCarbon TetrachlorideChlordaneCombined UraniumDichloromethaneDalaponDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDinosebEthylene DibromideEndrinEthylbenzeneGross Alpha, Excl. Radon And UHexachlorobenzeneHfpo-DaHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorNetfosaaNfdhaNmefosaaOxamylPfbaPFBSPfdaPfdoaPfeesaPfhpaPfhpsPfhxaPFHXSPfmbaPfmpaPFNAPFOAPFOSPfpeaPfpesPftaPftrdaPfunaPentachlorophenolPicloramSeleniumSimazineStyreneTetrachloroethyleneTolueneTotal Polychlorinated Biphenyls (PCB)ToxapheneTrichloroethyleneVinyl Chloridecis-1,2-DichloroethyleneLithiumO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact: COOMBER, JACOB
Phone: 315-589-2038
Email: [email protected]

Frequently asked questions about Williamson Town Wd

Is Williamson Town Wd tap water safe to drink?

EPA monitoring detected 19 contaminants in Williamson Town Wd's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Williamson Town Wd's water?

EPA monitoring detected Fluoride, Bromodichloromethane, Chloroform, Dibromochloromethane, Dichloroacetic Acid, and others. The full list with the level and data source for each is above.

How many people does Williamson Town Wd serve?

Williamson Town Wd reports serving 6,600 people in New York, per its EPA record.

Has Williamson Town Wd had any water quality violations?

The EPA has 43 violations on file for Williamson Town Wd, of which 12 are health-based (a contaminant limit or required treatment was breached) and 2 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.