Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MON | Monitoring | Resolved | 2023-05-01 → 2023-05-31 |
| MON | Monitoring | Resolved | 2023-05-01 → 2023-05-31 |
| MON | Monitoring | Resolved | 2023-05-01 → 2023-05-31 |
| MON | Monitoring | Resolved | 2023-02-01 → 2023-02-28 |
| MON | Monitoring | Resolved | 2023-02-01 → 2023-02-28 |
| MON | Monitoring | Resolved | 2023-02-01 → 2023-02-28 |
| MON | Monitoring | Resolved | 2023-02-01 → 2023-02-28 |
| MON | Monitoring | Resolved | 2022-09-01 → 2022-09-30 |
| MON | Monitoring | Resolved | 2022-09-01 → 2022-09-30 |
| MON | Monitoring | Resolved | 2022-09-01 → 2022-09-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate | 1870 µg/L 19% of the EPA limit 10000 µg/L | 14/16 | SYR4 | 2012–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 10/10 | LCR | 2025 |
| Barium | 81.3 µg/L 4.1% of the EPA limit 2000 µg/L
worst single sample: 82 µg/L | 3/3 | SYR4 | 2013–2019 |
| Bromodichloromethane | 3.289 µg/L No EPA limit set
worst single sample: 3.31 µg/L | 3/3 | SYR4 | 2013–2019 |
| Chloroform | 4.106 µg/L No EPA limit set
worst single sample: 4.14 µg/L | 3/3 | SYR4 | 2013–2019 |
| Dibromochloromethane | 2.004 µg/L No EPA limit set
worst single sample: 2.01 µg/L | 3/3 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 3.464 µg/L No EPA limit set
worst single sample: 3.65 µg/L | 3/3 | SYR4 | 2013–2019 |
| TTHM | 9.351 µg/L 12% of the EPA limit 80 µg/L
worst single sample: 9.4 µg/L | 3/3 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 7.753 µg/L 13% of the EPA limit 60 µg/L
worst single sample: 8.2 µg/L | 3/3 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 1.3855 µg/L No EPA limit set
worst single sample: 1.4 µg/L | 2/3 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 3.365 µg/L No EPA limit set
worst single sample: 3.44 µg/L | 2/3 | SYR4 | 2013–2019 |
| Bromoform | 1 µg/L No EPA limit set | 1/3 | SYR4 | 2013–2019 |
| Combined Radium (-226 And -228) | 0.4850 pCi/L 9.7% of the EPA limit 5 pCi/L | 1/1 | SYR4 | 2017 |
57 contaminants tested, none detected
Utility contact
Frequently asked questions about Hillside Apts
Is Hillside Apts tap water safe to drink?
EPA monitoring detected 13 contaminants in Hillside Apts's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Hillside Apts's water?
EPA monitoring detected Nitrate, Lead, Barium, Bromodichloromethane, Chloroform, and others. The full list with the level and data source for each is above.
How many people does Hillside Apts serve?
Hillside Apts reports serving 37 people in New York, per its EPA record.
Has Hillside Apts had any water quality violations?
The EPA has 31 violations on file for Hillside Apts, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.