Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MR | Monitoring | Archived | 2020-01-01 → 2020-12-31 |
| MR | Monitoring | Archived | 2020-01-01 → 2020-12-31 |
| MR | Monitoring | Archived | 2020-01-01 → 2020-12-31 |
| MR | Monitoring | Archived | 2020-01-01 → 2020-12-31 |
| MR | Monitoring | Archived | 2020-01-01 → 2020-12-31 |
| MR | Monitoring | Archived | 2020-01-01 → 2020-12-31 |
| MON | Monitoring | Resolved | 2018-12-01 → 2018-12-31 |
| MON | Monitoring | Resolved | 2018-12-01 → 2018-12-31 |
| MON | Monitoring | Resolved | 2018-12-01 → 2018-12-31 |
| Other | Monitoring | Resolved | 2017-07-01 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Bromodichloromethane | 3.5115 µg/L No EPA limit set
worst single sample: 4.2 µg/L | 10/10 | SYR4 | 2014–2019 |
| Bromoform | 2.5395 µg/L No EPA limit set
worst single sample: 2.67 µg/L | 10/10 | SYR4 | 2014–2019 |
| Chloroform | 1.966 µg/L No EPA limit set
worst single sample: 2.2 µg/L | 10/10 | SYR4 | 2014–2019 |
| Dibromoacetic Acid | 5.02 µg/L No EPA limit set
worst single sample: 5.2 µg/L | 10/10 | SYR4 | 2014–2019 |
| Dibromochloromethane | 4.744 µg/L No EPA limit set
worst single sample: 5.5 µg/L | 10/10 | SYR4 | 2014–2019 |
| TTHM | 12.615 µg/L 16% of the EPA limit 80 µg/L
worst single sample: 14.1 µg/L | 10/10 | SYR4 | 2014–2019 |
| Total Haloacetic Acids (HAA5) | 12.802 µg/L 21% of the EPA limit 60 µg/L
worst single sample: 13 µg/L | 10/10 | SYR4 | 2014–2019 |
| Dichloroacetic Acid | 4.52 µg/L No EPA limit set
worst single sample: 4.8 µg/L | 9/9 | SYR4 | 2014–2019 |
| Trichloroacetic Acid | 1.743 µg/L No EPA limit set
worst single sample: 1.82 µg/L | 8/10 | SYR4 | 2014–2019 |
| Monobromoacetic Acid | 5.06 µg/L No EPA limit set
worst single sample: 5.6 µg/L | 7/10 | SYR4 | 2014–2019 |
| Lead | 0.0083 mg/L 55% of the EPA limit 0.0150 mg/L | 4/4 | LCR | 2025 |
| Monochloroacetic Acid | 2.36 µg/L No EPA limit set
worst single sample: 2.4 µg/L | 3/10 | SYR4 | 2014–2019 |
Utility contact
Frequently asked questions about Town of Waterloo Water District
Is Town of Waterloo Water District tap water safe to drink?
EPA monitoring detected 12 contaminants in Town of Waterloo Water District's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Town of Waterloo Water District's water?
EPA monitoring detected Bromodichloromethane, Bromoform, Chloroform, Dibromoacetic Acid, Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does Town of Waterloo Water District serve?
Town of Waterloo Water District reports serving 250 people in New York, per its EPA record.
Has Town of Waterloo Water District had any water quality violations?
The EPA has 21 violations on file for Town of Waterloo Water District, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.