Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MR | Monitoring | Archived | 2020-01-01 → 2020-12-31 |
| MR | Monitoring | Archived | 2020-01-01 → 2020-12-31 |
| MR | Monitoring | Archived | 2020-01-01 → 2020-12-31 |
| MR | Monitoring | Archived | 2020-01-01 → 2020-12-31 |
| MR | Monitoring | Archived | 2020-01-01 → 2020-12-31 |
| MR | Monitoring | Archived | 2020-01-01 → 2020-12-31 |
| MON | Monitoring | Resolved | 2018-12-01 → 2018-12-31 |
| MON | Monitoring | Resolved | 2018-12-01 → 2018-12-31 |
| MON | Monitoring | Resolved | 2018-12-01 → 2018-12-31 |
| Other | Monitoring | Resolved | 2017-07-01 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Lead | 0.0083 mg/L 55% of the EPA limit 0.0150 mg/L | 7/7 | LCR | 2025 |
| Bromodichloromethane | 5.98 µg/L No EPA limit set
worst single sample: 6.64 µg/L | 6/6 | SYR4 | 2014–2019 |
| Bromoform | 3.215 µg/L No EPA limit set
worst single sample: 3.52 µg/L | 6/6 | SYR4 | 2014–2019 |
| Chloroform | 3.8325 µg/L No EPA limit set
worst single sample: 4.41 µg/L | 6/6 | SYR4 | 2014–2019 |
| Dibromoacetic Acid | 4.875 µg/L No EPA limit set
worst single sample: 4.9 µg/L | 6/6 | SYR4 | 2014–2019 |
| Dibromochloromethane | 6.46 µg/L No EPA limit set
worst single sample: 6.88 µg/L | 6/6 | SYR4 | 2014–2019 |
| Dichloroacetic Acid | 5.0225 µg/L No EPA limit set
worst single sample: 5.23 µg/L | 6/6 | SYR4 | 2014–2019 |
| TTHM | 19.525 µg/L 24% of the EPA limit 80 µg/L
worst single sample: 21.5 µg/L | 6/6 | SYR4 | 2014–2019 |
| Total Haloacetic Acids (HAA5) | 12.625 µg/L 21% of the EPA limit 60 µg/L
worst single sample: 13 µg/L | 6/6 | SYR4 | 2014–2019 |
| Monobromoacetic Acid | 2.425 µg/L No EPA limit set
worst single sample: 2.6 µg/L | 3/6 | SYR4 | 2014–2019 |
| Monochloroacetic Acid | 2.364 µg/L No EPA limit set
worst single sample: 2.4 µg/L | 3/6 | SYR4 | 2014–2019 |
| Trichloroacetic Acid | 0.9280 µg/L No EPA limit set
worst single sample: 0.9400 µg/L | 3/6 | SYR4 | 2014–2019 |
Utility contact
Frequently asked questions about Burgess Road Water District
Is Burgess Road Water District tap water safe to drink?
EPA monitoring detected 12 contaminants in Burgess Road Water District's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Burgess Road Water District's water?
EPA monitoring detected Lead, Bromodichloromethane, Bromoform, Chloroform, Dibromoacetic Acid, and others. The full list with the level and data source for each is above.
How many people does Burgess Road Water District serve?
Burgess Road Water District reports serving 200 people in New York, per its EPA record.
Has Burgess Road Water District had any water quality violations?
The EPA has 34 violations on file for Burgess Road Water District, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.