Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MR | Monitoring | Resolved | 2020-01-01 → 2020-12-31 |
| MR | Monitoring | Resolved | 2020-01-01 → 2020-12-31 |
| MR | Monitoring | Resolved | 2020-01-01 → 2020-12-31 |
| MR | Monitoring | Resolved | 2020-01-01 → 2020-12-31 |
| MR | Monitoring | Resolved | 2020-01-01 → 2020-12-31 |
| MR | Monitoring | Resolved | 2020-01-01 → 2020-12-31 |
| MR | Monitoring | Resolved | 2020-01-01 → 2020-12-31 |
| MR | Monitoring | Resolved | 2020-01-01 → 2020-12-31 |
| MON | Monitoring | Resolved | 2019-11-01 → 2019-11-30 |
| MON | Monitoring | Resolved | 2019-11-01 → 2019-11-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Bromodichloromethane | 3.398 µg/L No EPA limit set
worst single sample: 3.5 µg/L | 7/7 | SYR4 | 2014–2019 |
| Bromoform | 2.833 µg/L No EPA limit set
worst single sample: 2.89 µg/L | 7/7 | SYR4 | 2014–2019 |
| Chloroform | 1.656 µg/L No EPA limit set
worst single sample: 1.68 µg/L | 7/7 | SYR4 | 2014–2019 |
| Dibromochloromethane | 4.536 µg/L No EPA limit set
worst single sample: 4.56 µg/L | 7/7 | SYR4 | 2014–2019 |
| Dichloroacetic Acid | 5.029 µg/L No EPA limit set
worst single sample: 5.17 µg/L | 7/7 | SYR4 | 2014–2019 |
| Lead | 0.0083 mg/L 55% of the EPA limit 0.0150 mg/L | 7/7 | LCR | 2025 |
| TTHM | 11.89 µg/L 15% of the EPA limit 80 µg/L
worst single sample: 12.1 µg/L | 7/7 | SYR4 | 2014–2019 |
| Total Haloacetic Acids (HAA5) | 13.619 µg/L 23% of the EPA limit 60 µg/L
worst single sample: 13.97 µg/L | 7/7 | SYR4 | 2014–2019 |
| Dibromoacetic Acid | 5.9975 µg/L No EPA limit set
worst single sample: 6 µg/L | 6/7 | SYR4 | 2014–2019 |
| Monobromoacetic Acid | 2.755 µg/L No EPA limit set
worst single sample: 2.8 µg/L | 4/7 | SYR4 | 2014–2019 |
| Trichloroacetic Acid | 0.9315 µg/L No EPA limit set
worst single sample: 0.9600 µg/L | 4/7 | SYR4 | 2014–2019 |
1 contaminants tested, none detected
Utility contact
Frequently asked questions about Seneca County Water District #1
Is Seneca County Water District #1 tap water safe to drink?
EPA monitoring detected 11 contaminants in Seneca County Water District #1's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Seneca County Water District #1's water?
EPA monitoring detected Bromodichloromethane, Bromoform, Chloroform, Dibromochloromethane, Dichloroacetic Acid, and others. The full list with the level and data source for each is above.
How many people does Seneca County Water District #1 serve?
Seneca County Water District #1 reports serving 1,820 people in New York, per its EPA record.
Has Seneca County Water District #1 had any water quality violations?
The EPA has 33 violations on file for Seneca County Water District #1, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.