Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| Other | Monitoring | Unaddressed | 2024-01-01 |
| MON | Monitoring | Archived | 2016-04-01 → 2016-04-30 |
| MON | Monitoring | Archived | 2016-04-01 → 2016-04-30 |
| MR | Monitoring | Archived | 2015-08-01 → 2015-08-31 |
| MR | Monitoring | Archived | 2015-08-01 → 2015-08-31 |
| MR | Monitoring | Archived | 2015-07-01 → 2015-07-31 |
| MR | Monitoring | Archived | 2015-07-01 → 2015-07-31 |
| MR | Monitoring | Archived | 2015-05-01 → 2015-05-31 |
| MR | Monitoring | Archived | 2015-05-01 → 2015-05-31 |
| MR | Monitoring | Resolved | 2014-11-01 → 2014-11-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Bromodichloromethane | 6.785 µg/L No EPA limit set
worst single sample: 7.5 µg/L | 22/22 | SYR4 | 2014–2019 |
| Chloroform | 60.9 µg/L No EPA limit set
worst single sample: 130 µg/L | 22/22 | SYR4 | 2014–2019 |
| TTHM | 64.3 µg/L 80% of the EPA limit 80 µg/L
worst single sample: 136 µg/L | 22/22 | SYR4 | 2014–2019 |
| Total Haloacetic Acids (HAA5) | 26.295 µg/L 44% of the EPA limit 60 µg/L
worst single sample: 42 µg/L | 22/22 | SYR4 | 2014–2019 |
| Dichloroacetic Acid | 10.35 µg/L No EPA limit set
worst single sample: 17 µg/L | 20/22 | SYR4 | 2014–2019 |
| Dibromochloromethane | 6.45 µg/L No EPA limit set
worst single sample: 6.9 µg/L | 19/22 | SYR4 | 2014–2019 |
| Bromoform | 2.78 µg/L No EPA limit set
worst single sample: 3.1 µg/L | 17/22 | SYR4 | 2014–2019 |
| Dibromoacetic Acid | 2.8 µg/L No EPA limit set
worst single sample: 3.1 µg/L | 16/22 | SYR4 | 2014–2019 |
| Lead | 0.0010 mg/L 6.7% of the EPA limit 0.0150 mg/L | 16/16 | LCR | 2025 |
| Trichloroacetic Acid | 18.3 µg/L No EPA limit set
worst single sample: 19 µg/L | 15/22 | SYR4 | 2014–2019 |
| Monobromoacetic Acid | 1.99 µg/L No EPA limit set
worst single sample: 2 µg/L | 2/22 | SYR4 | 2014–2019 |
| Copper | 100 µg/L 7.7% of the EPA limit 1300 µg/L | 1/1 | SYR4 | 2015 |
| Monochloroacetic Acid | 5.8 µg/L No EPA limit set | 1/22 | SYR4 | 2014–2019 |
Utility contact
Frequently asked questions about Cpwa Route 146a Ballston Wd
Is Cpwa Route 146a Ballston Wd tap water safe to drink?
EPA monitoring detected 13 contaminants in Cpwa Route 146a Ballston Wd's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Cpwa Route 146a Ballston Wd's water?
EPA monitoring detected Bromodichloromethane, Chloroform, TTHM, Total Haloacetic Acids (HAA5), Dichloroacetic Acid, and others. The full list with the level and data source for each is above.
How many people does Cpwa Route 146a Ballston Wd serve?
Cpwa Route 146a Ballston Wd reports serving 60 people in New York, per its EPA record.
Has Cpwa Route 146a Ballston Wd had any water quality violations?
The EPA has 39 violations on file for Cpwa Route 146a Ballston Wd, of which 0 are health-based (a contaminant limit or required treatment was breached) and 1 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.