Tap WaterIndex

← New York

Tap water quality report

Wilton Water & Sewer Authority

EPA monitoring tested this supplier for 101 contaminants and detected 16. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

101
contaminants tested
16
detected
9,490
people served
7
health-based violations
New York rankingsLead in New YorkPFAS in New York
Water source
SWP
Ownership
Mixed public/private
Counties served
Saratoga

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

7
health-based violations
652
violations on file
1
still open
ViolationTypeStatusPeriod
TT Health-based Resolved 2015-07-31
TT Health-based Resolved 2015-07-31
TT Health-based Resolved 2015-07-31
TT Health-based Resolved 2010-05-06
TT Health-based Resolved 2010-05-06
TT Health-based Resolved 2010-05-06
TT Health-based Resolved 2010-05-06
MR Monitoring Resolved 2022-01-01 → 2022-12-31
MR Monitoring Resolved 2022-01-01 → 2022-12-31
MR Monitoring Resolved 2022-01-01 → 2022-12-31

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
TTHM
95.9 µg/L 120%
of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 140 µg/L
59/59 SYR4 2012–2019
Bromodichloromethane
5.415 µg/L
No EPA limit set
worst single sample: 22.8 µg/L
58/59 SYR4 2012–2019
Chloroform
95 µg/L
No EPA limit set
worst single sample: 128 µg/L
57/59 SYR4 2012–2019
Total Haloacetic Acids (HAA5)
72.7 µg/L 121%
of the EPA limit, at the 95th percentile of samples — 60 µg/L
worst single sample: 138 µg/L
54/59 SYR4 2012–2019
Dichloroacetic Acid
31.35 µg/L
No EPA limit set
worst single sample: 69 µg/L
52/59 SYR4 2012–2019
Nitrate
1250 µg/L 13%
of the EPA limit 10000 µg/L
worst single sample: 1260 µg/L
48/48 SYR4 2012–2019
Trichloroacetic Acid
49.56 µg/L
No EPA limit set
worst single sample: 69 µg/L
47/59 SYR4 2012–2019
Lead
0.0016 mg/L 11%
of the EPA limit 0.0150 mg/L
 26/26 LCR 2023
Monochloroacetic Acid
3.21 µg/L
No EPA limit set
worst single sample: 3.5 µg/L
24/59 SYR4 2012–2019
Dibromochloromethane
1.795 µg/L
No EPA limit set
worst single sample: 2.3 µg/L
22/59 SYR4 2012–2019
Barium
55.64 µg/L 2.8%
of the EPA limit 2000 µg/L
worst single sample: 56 µg/L
9/9 SYR4 2013–2019
Dibromoacetic Acid
1.38 µg/L
No EPA limit set
worst single sample: 1.42 µg/L
6/59 SYR4 2012–2019
Arsenic
1.78 µg/L 18%
of the EPA limit 10 µg/L
worst single sample: 1.8 µg/L
5/9 SYR4 2013–2019
Combined Radium (-226 And -228)
1.06 pCi/L 21%
of the EPA limit 5 pCi/L
worst single sample: 1.11 pCi/L
3/6 SYR4 2013–2016
Monobromoacetic Acid
1.776 µg/L
No EPA limit set
worst single sample: 1.8 µg/L
3/59 SYR4 2012–2019
Copper
50 µg/L 3.8%
of the EPA limit 1300 µg/L
 1/1 SYR4 2012
85 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS2,4,5-TP2,4-D4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaAntimony, TotalAtrazineBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalBromoformChlorobenzeneCyanideCadmiumCarbofuranCarbon TetrachlorideChlordaneChromiumDichloromethaneDalaponDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDinosebEthylene DibromideEndrinEthylbenzeneFluorideHexachlorobenzeneHfpo-DaHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorNetfosaaNfdhaNmefosaaOxamylPfbaPFBSPfdaPfdoaPfeesaPfhpaPfhpsPfhxaPFHXSPfmbaPfmpaPFNAPFOAPFOSPfpeaPfpesPftaPftrdaPfunaPentachlorophenolPicloramSeleniumSimazineStyreneTetrachloroethyleneThallium, TotalTolueneTotal Polychlorinated Biphenyls (PCB)ToxapheneTrichloroethyleneVinyl Chloridecis-1,2-DichloroethyleneLithiumO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
MOONEY, MICHAEL
Phone
518-581-8626
Email
[email protected]

Frequently asked questions about Wilton Water & Sewer Authority

Is Wilton Water & Sewer Authority tap water safe to drink?

EPA monitoring detected 16 contaminants in Wilton Water & Sewer Authority's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Wilton Water & Sewer Authority's water?

EPA monitoring detected TTHM, Bromodichloromethane, Chloroform, Total Haloacetic Acids (HAA5), Dichloroacetic Acid, and others. The full list with the level and data source for each is above.

How many people does Wilton Water & Sewer Authority serve?

Wilton Water & Sewer Authority reports serving 9,490 people in New York, per its EPA record.

Has Wilton Water & Sewer Authority had any water quality violations?

The EPA has 652 violations on file for Wilton Water & Sewer Authority, of which 7 are health-based (a contaminant limit or required treatment was breached) and 1 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.