Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MR | Monitoring | Archived | 1998-01-01 → 1998-12-31 |
| MR | Monitoring | Resolved | 1994-07-01 |
| MR | Monitoring | Archived | 1994-01-01 → 1994-06-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Lead | 0.0024 mg/L 16% of the EPA limit 0.0150 mg/L | 7/7 | LCR | 2024 |
| Chloroform | 1.1475 µg/L No EPA limit set
worst single sample: 1.2 µg/L | 6/7 | SYR4 | 2012–2019 |
| Bromodichloromethane | 0.6340 µg/L No EPA limit set
worst single sample: 0.6400 µg/L | 5/7 | SYR4 | 2012–2019 |
| Dibromochloromethane | 0.8150 µg/L No EPA limit set
worst single sample: 0.8300 µg/L | 4/7 | SYR4 | 2012–2019 |
| Nitrate | 90 µg/L 0.9% of the EPA limit 10000 µg/L | 4/10 | SYR4 | 2012–2016 |
| Barium | 3.99 µg/L 0.2% of the EPA limit 2000 µg/L
worst single sample: 4 µg/L | 2/2 | SYR4 | 2013–2016 |
| Fluoride | 206.65 µg/L 5.2% of the EPA limit 4000 µg/L
worst single sample: 207 µg/L | 2/2 | SYR4 | 2013–2016 |
| Monochloroacetic Acid | 2 µg/L No EPA limit set | 2/6 | SYR4 | 2014–2019 |
| TTHM | 1.324 µg/L 1.7% of the EPA limit 80 µg/L
worst single sample: 1.34 µg/L | 2/2 | SYR4 | 2016–2018 |
| 2,4,5-TP | 0.2000 µg/L 0.4% of the EPA limit 50 µg/L | 1/2 | SYR4 | 2013–2016 |
| 2,4-D | 0.1000 µg/L 0.1% of the EPA limit 70 µg/L | 1/2 | SYR4 | 2013–2016 |
| Arsenic | 0.5000 µg/L 5% of the EPA limit 10 µg/L | 1/2 | SYR4 | 2013–2016 |
| Atrazine | 0.1000 µg/L 3.3% of the EPA limit 3 µg/L | 1/2 | SYR4 | 2013–2016 |
| Benzo(A)Pyrene | 0.1000 µg/L 50% of the EPA limit 0.2000 µg/L | 1/2 | SYR4 | 2013–2016 |
| Cyanide | 10 µg/L 5% of the EPA limit 200 µg/L | 1/2 | SYR4 | 2013–2016 |
| Cadmium | 0.7000 µg/L 14% of the EPA limit 5 µg/L | 1/2 | SYR4 | 2013–2016 |
| Carbofuran | 0.2000 µg/L 0.5% of the EPA limit 40 µg/L | 1/2 | SYR4 | 2013–2016 |
| Chlordane | 0.2000 µg/L 10% of the EPA limit 2 µg/L | 1/2 | SYR4 | 2013–2016 |
| Chromium | 2 µg/L 2% of the EPA limit 100 µg/L | 1/2 | SYR4 | 2013–2016 |
| Dalapon | 1 µg/L 0.5% of the EPA limit 200 µg/L | 1/2 | SYR4 | 2013–2016 |
| Di(2-ethylhexyl) Adipate | 2.08 µg/L 0.5% of the EPA limit 400 µg/L | 1/1 | SYR4 | 2013 |
| Di(2-ethylhexyl) Phthalate | 2.08 µg/L 35% of the EPA limit 6 µg/L | 1/1 | SYR4 | 2013 |
| Dichloroacetic Acid | 1.2 µg/L No EPA limit set | 1/6 | SYR4 | 2014–2019 |
| Dinoseb | 0.2000 µg/L 2.9% of the EPA limit 7 µg/L | 1/2 | SYR4 | 2013–2016 |
| Endrin | 0.1000 µg/L 5% of the EPA limit 2 µg/L | 1/2 | SYR4 | 2013–2016 |
| Hexachlorobenzene | 0.1000 µg/L 10% of the EPA limit 1 µg/L | 1/2 | SYR4 | 2013–2016 |
| Heptachlor | 0.1000 µg/L 25% of the EPA limit 0.4000 µg/L | 1/2 | SYR4 | 2013–2016 |
| Heptachlor Epoxide | 0.1000 µg/L 50% of the EPA limit 0.2000 µg/L | 1/2 | SYR4 | 2013–2016 |
| Hexachlorocyclopentadiene | 0.1000 µg/L 0.2% of the EPA limit 50 µg/L | 1/2 | SYR4 | 2013–2016 |
| Oxamyl | 0.2000 µg/L 0.1% of the EPA limit 200 µg/L | 1/2 | SYR4 | 2013–2016 |
| Picloram | 0.1000 µg/L 0% of the EPA limit 500 µg/L | 1/2 | SYR4 | 2013–2016 |
| Selenium | 3.1 µg/L 6.2% of the EPA limit 50 µg/L | 1/2 | SYR4 | 2013–2016 |
| Simazine | 0.1000 µg/L 2.5% of the EPA limit 4 µg/L | 1/2 | SYR4 | 2013–2016 |
| Total Haloacetic Acids (HAA5) | 2 µg/L 3.3% of the EPA limit 60 µg/L | 1/2 | SYR4 | 2016–2018 |
| Toxaphene | 0.5100 µg/L 17% of the EPA limit 3 µg/L | 1/2 | SYR4 | 2013–2016 |
40 contaminants tested, none detected
Utility contact
Frequently asked questions about Mountain Brook Homes
Is Mountain Brook Homes tap water safe to drink?
EPA monitoring detected 35 contaminants in Mountain Brook Homes's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Mountain Brook Homes's water?
EPA monitoring detected Lead, Chloroform, Bromodichloromethane, Dibromochloromethane, Nitrate, and others. The full list with the level and data source for each is above.
How many people does Mountain Brook Homes serve?
Mountain Brook Homes reports serving 125 people in New York, per its EPA record.
Has Mountain Brook Homes had any water quality violations?
The EPA has 3 violations on file for Mountain Brook Homes, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.