Tap WaterIndex

← New York

Tap water quality report

Monroe Wd #08 (Skyview Hills)

EPA monitoring tested this supplier for 3 contaminants and detected 3. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

3
contaminants tested
3
detected
544
people served
4
health-based violations
New York rankingsLead in New YorkPFAS in New York
Water source
SWP
Ownership
Local government
Counties served
Orange

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

4
health-based violations
51
violations on file
0
still open
ViolationTypeStatusPeriod
MCL Health-based Resolved 2019-04-01 → 2019-06-30
MCL Health-based Resolved 2019-04-01 → 2019-06-30
MCL Health-based Resolved 2019-04-01 → 2019-06-30
MCL Health-based Resolved 2019-04-01 → 2019-06-30
MR Monitoring Resolved 2020-01-01 → 2020-03-31
MR Monitoring Resolved 2020-01-01 → 2020-03-31
MR Monitoring Resolved 2020-01-01 → 2020-03-31
MR Monitoring Resolved 2020-01-01 → 2020-03-31
MR Monitoring Resolved 2020-01-01 → 2020-03-31
MR Monitoring Resolved 2020-01-01 → 2020-03-31

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
TTHM
75.5 µg/L 94%
of the EPA limit 80 µg/L
worst single sample: 89 µg/L
26/26 SYR4 2012–2019
Total Haloacetic Acids (HAA5)
66 µg/L 110%
of the EPA limit, at the 95th percentile of samples — 60 µg/L
worst single sample: 83 µg/L
26/26 SYR4 2012–2019
Lead
0.0042 mg/L 28%
of the EPA limit 0.0150 mg/L
 1/1 LCR 2005

Utility contact

Contact
OLSEN, ANGELINA
Phone
845-783-1900
Email
[email protected]

Frequently asked questions about Monroe Wd #08 (Skyview Hills)

Is Monroe Wd #08 (Skyview Hills) tap water safe to drink?

EPA monitoring detected 3 contaminants in Monroe Wd #08 (Skyview Hills)'s water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Monroe Wd #08 (Skyview Hills)'s water?

EPA monitoring detected TTHM, Total Haloacetic Acids (HAA5), Lead. The full list with the level and data source for each is above.

How many people does Monroe Wd #08 (Skyview Hills) serve?

Monroe Wd #08 (Skyview Hills) reports serving 544 people in New York, per its EPA record.

Has Monroe Wd #08 (Skyview Hills) had any water quality violations?

The EPA has 51 violations on file for Monroe Wd #08 (Skyview Hills), of which 4 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.