Tap WaterIndex

← New York

Tap water quality report

Mount Morris Village

EPA monitoring tested this supplier for 101 contaminants and detected 20. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

101
contaminants tested
20
detected
3,500
people served
8
health-based violations
New York rankingsLead in New YorkPFAS in New York
Water source
Surface water
Ownership
Local government
Counties served
Livingston

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

8
health-based violations
257
violations on file
0
still open
ViolationTypeStatusPeriod
TT Health-based Resolved 2016-10-01 → 2016-10-31
TT Health-based Resolved 2016-10-01 → 2016-10-31
TT Health-based Resolved 2016-10-01 → 2016-10-31
TT Health-based Resolved 2016-10-01 → 2016-10-31
MCL Health-based Resolved 2009-11-01 → 2009-11-30
MCL Health-based Resolved 2009-11-01 → 2009-11-30
MCL Health-based Resolved 2009-11-01 → 2009-11-30
MCL Health-based Resolved 2009-11-01 → 2009-11-30
MR Monitoring Resolved 2022-04-01 → 2022-06-30
MR Monitoring Resolved 2022-04-01 → 2022-06-30

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Bromodichloromethane
11.3 µg/L
No EPA limit set
worst single sample: 12 µg/L
55/55 SYR4 2012–2019
Chloroform
62.5 µg/L
No EPA limit set
worst single sample: 72 µg/L
55/55 SYR4 2012–2019
Dichloroacetic Acid
26 µg/L
No EPA limit set
worst single sample: 31 µg/L
54/55 SYR4 2012–2019
TTHM
74.45 µg/L 93%
of the EPA limit 80 µg/L
worst single sample: 85 µg/L
54/54 SYR4 2012–2019
Trichloroacetic Acid
24.35 µg/L
No EPA limit set
worst single sample: 46 µg/L
54/55 SYR4 2012–2019
Total Haloacetic Acids (HAA5)
54.8 µg/L 91%
of the EPA limit 60 µg/L
worst single sample: 65 µg/L
53/54 SYR4 2012–2019
Dibromochloromethane
1.9 µg/L
No EPA limit set
worst single sample: 2.7 µg/L
51/55 SYR4 2012–2019
Monochloroacetic Acid
8.925 µg/L
No EPA limit set
worst single sample: 9.3 µg/L
16/55 SYR4 2012–2019
Monobromoacetic Acid
18.5 µg/L
No EPA limit set
worst single sample: 24 µg/L
11/55 SYR4 2012–2019
Nitrate
870 µg/L 8.7%
of the EPA limit 10000 µg/L
 10/16 SYR4 2012–2019
Lead
0.0022 mg/L 15%
of the EPA limit 0.0150 mg/L
 9/9 LCR 2023
Barium
26.25 µg/L 1.3%
of the EPA limit 2000 µg/L
worst single sample: 28 µg/L
8/8 SYR4 2012–2019
Atrazine
0.3690 µg/L 12%
of the EPA limit 3 µg/L
worst single sample: 0.3900 µg/L
7/12 SYR4 2012–2019
Chromium
4.1 µg/L 4.1%
of the EPA limit 100 µg/L
worst single sample: 4.7 µg/L
7/8 SYR4 2012–2019
Di(2-ethylhexyl) Phthalate
1.069 µg/L 18%
of the EPA limit 6 µg/L
worst single sample: 1.1 µg/L
3/9 SYR4 2012–2019
Dibromoacetic Acid
2.24 µg/L
No EPA limit set
worst single sample: 2.3 µg/L
3/55 SYR4 2012–2019
Antimony, Total
1.8 µg/L 30%
of the EPA limit 6 µg/L
 1/8 SYR4 2012–2019
Cyanide
55 µg/L 28%
of the EPA limit 200 µg/L
 1/8 SYR4 2012–2019
Combined Radium (-226 And -228)
0.7000 pCi/L 14%
of the EPA limit 5 pCi/L
 1/1 SYR4 2016
Fluoride
250 µg/L 6.3%
of the EPA limit 4000 µg/L
 1/9 SYR4 2012–2019
81 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS2,4,5-TP2,4-D4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaArsenicAsbestosBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalBromoformChlorobenzeneCadmiumCarbofuranCarbon TetrachlorideChlordaneDichloromethaneDalaponDi(2-ethylhexyl) AdipateDinosebEthylene DibromideEndrinEthylbenzeneHexachlorobenzeneHfpo-DaHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorNetfosaaNfdhaNmefosaaOxamylPfbaPFBSPfdaPfdoaPfeesaPfhpaPfhpsPfhxaPFHXSPfmbaPfmpaPFNAPFOAPFOSPfpeaPfpesPftaPftrdaPfunaPentachlorophenolPicloramSeleniumSimazineStyreneTetrachloroethyleneThallium, TotalTolueneTotal Polychlorinated Biphenyls (PCB)ToxapheneTrichloroethyleneVinyl Chloridecis-1,2-DichloroethyleneLithiumO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
BACON, KELLY
Phone
585-658-4160
Email
[email protected]

Frequently asked questions about Mount Morris Village

Is Mount Morris Village tap water safe to drink?

EPA monitoring detected 20 contaminants in Mount Morris Village's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Mount Morris Village's water?

EPA monitoring detected Bromodichloromethane, Chloroform, Dichloroacetic Acid, TTHM, Trichloroacetic Acid, and others. The full list with the level and data source for each is above.

How many people does Mount Morris Village serve?

Mount Morris Village reports serving 3,500 people in New York, per its EPA record.

Has Mount Morris Village had any water quality violations?

The EPA has 257 violations on file for Mount Morris Village, of which 8 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.