Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2011-07-01 → 2011-09-30 |
| MCL | Health-based | Resolved | 2011-07-01 → 2011-09-30 |
| MCL | Health-based | Resolved | 2011-07-01 → 2011-09-30 |
| MCL | Health-based | Resolved | 2011-07-01 → 2011-09-30 |
| MCL | Health-based | Resolved | 2011-07-01 → 2011-09-30 |
| MCL | Health-based | Resolved | 2011-07-01 → 2011-09-30 |
| MCL | Health-based | Resolved | 2008-07-01 → 2008-09-30 |
| MCL | Health-based | Resolved | 2008-07-01 → 2008-09-30 |
| MCL | Health-based | Resolved | 2008-07-01 → 2008-09-30 |
| MCL | Health-based | Resolved | 2008-07-01 → 2008-09-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Fluoride | 900 µg/L 23% of the EPA limit 4000 µg/L
worst single sample: 1000 µg/L | 92/92 | SYR4 | 2012–2019 |
| Bromodichloromethane | 22 µg/L No EPA limit set
worst single sample: 24 µg/L | 57/57 | SYR4 | 2012–2019 |
| Chloroform | 57.8 µg/L No EPA limit set
worst single sample: 66 µg/L | 57/57 | SYR4 | 2012–2019 |
| Dibromochloromethane | 5.46 µg/L No EPA limit set
worst single sample: 8 µg/L | 57/57 | SYR4 | 2012–2019 |
| TTHM | 84 µg/L 105% of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 96 µg/L | 57/57 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 47.4 µg/L 79% of the EPA limit 60 µg/L
worst single sample: 57 µg/L | 57/57 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 28 µg/L No EPA limit set
worst single sample: 32 µg/L | 57/57 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 23 µg/L No EPA limit set
worst single sample: 25 µg/L | 56/57 | SYR4 | 2012–2019 |
| Lead | 0.0027 mg/L 18% of the EPA limit 0.0150 mg/L | 14/14 | LCR | 2023 |
| Monochloroacetic Acid | 2.74 µg/L No EPA limit set
worst single sample: 3 µg/L | 14/57 | SYR4 | 2012–2019 |
| Nitrate | 300 µg/L 3% of the EPA limit 10000 µg/L | 8/14 | SYR4 | 2012–2019 |
| Barium | 26.5 µg/L 1.3% of the EPA limit 2000 µg/L
worst single sample: 27 µg/L | 6/6 | SYR4 | 2012–2019 |
| Di(2-ethylhexyl) Phthalate | 1.78 µg/L 30% of the EPA limit 6 µg/L
worst single sample: 1.8 µg/L | 5/11 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 1.28 µg/L No EPA limit set
worst single sample: 1.3 µg/L | 5/57 | SYR4 | 2012–2019 |
| Chromium | 4.48 µg/L 4.5% of the EPA limit 100 µg/L
worst single sample: 4.6 µg/L | 4/6 | SYR4 | 2012–2019 |
| Antimony, Total | 0.4300 µg/L 7.2% of the EPA limit 6 µg/L | 1/6 | SYR4 | 2012–2019 |
| Arsenic | 1.2 µg/L 12% of the EPA limit 10 µg/L | 1/6 | SYR4 | 2012–2019 |
| Bromoform | 0.5000 µg/L No EPA limit set | 1/57 | SYR4 | 2012–2019 |
| Cyanide | 110 µg/L 55% of the EPA limit 200 µg/L | 1/6 | SYR4 | 2012–2019 |
| Di(2-ethylhexyl) Adipate | 0.6700 µg/L 0.2% of the EPA limit 400 µg/L | 1/11 | SYR4 | 2012–2019 |
| Monobromoacetic Acid | 1.3 µg/L No EPA limit set | 1/57 | SYR4 | 2012–2019 |
80 contaminants tested, none detected
Frequently asked questions about Geneseo Village
Is Geneseo Village tap water safe to drink?
EPA monitoring detected 21 contaminants in Geneseo Village's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Geneseo Village's water?
EPA monitoring detected Fluoride, Bromodichloromethane, Chloroform, Dibromochloromethane, TTHM, and others. The full list with the level and data source for each is above.
How many people does Geneseo Village serve?
Geneseo Village reports serving 8,000 people, per its EPA record.
Has Geneseo Village had any water quality violations?
The EPA has 295 violations on file for Geneseo Village, of which 20 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.