Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 1996-01-01 → 1996-01-31 |
| MCL | Health-based | Resolved | 1996-01-01 → 1996-01-31 |
| MCL | Health-based | Archived | 1994-07-01 → 1994-07-31 |
| MR | Monitoring | Resolved | 2024-10-01 → 2024-12-31 |
| MR | Monitoring | Resolved | 2024-10-01 → 2024-12-31 |
| MR | Monitoring | Resolved | 2024-10-01 → 2024-12-31 |
| MR | Monitoring | Resolved | 2024-10-01 → 2024-12-31 |
| MR | Monitoring | Resolved | 2024-10-01 → 2024-12-31 |
| MR | Monitoring | Resolved | 2024-10-01 → 2024-12-31 |
| MR | Monitoring | Resolved | 2024-07-01 → 2024-09-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Total Haloacetic Acids (HAA5) | 19.928 µg/L 33% of the EPA limit 60 µg/L
worst single sample: 37.75 µg/L | 107/108 | SYR4 | 2012–2019 |
| Bromodichloromethane | 13.175 µg/L No EPA limit set
worst single sample: 14 µg/L | 106/107 | SYR4 | 2012–2019 |
| Chloroform | 32.2 µg/L No EPA limit set
worst single sample: 34 µg/L | 106/107 | SYR4 | 2012–2019 |
| Dibromochloromethane | 5.735 µg/L No EPA limit set
worst single sample: 6 µg/L | 106/107 | SYR4 | 2012–2019 |
| TTHM | 51.025 µg/L 64% of the EPA limit 80 µg/L
worst single sample: 54 µg/L | 106/107 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 10.675 µg/L No EPA limit set
worst single sample: 13 µg/L | 106/108 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 8.548 µg/L No EPA limit set
worst single sample: 12.6 µg/L | 105/108 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 3.085 µg/L No EPA limit set
worst single sample: 8.27 µg/L | 48/107 | SYR4 | 2012–2019 |
| Monobromoacetic Acid | 1.262 µg/L No EPA limit set
worst single sample: 7.32 µg/L | 35/107 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 4.779 µg/L No EPA limit set
worst single sample: 8.38 µg/L | 32/108 | SYR4 | 2012–2019 |
| Bromoform | 0.6880 µg/L No EPA limit set
worst single sample: 0.7000 µg/L | 13/107 | SYR4 | 2012–2019 |
| Lead | 0.0011 mg/L 7.5% of the EPA limit 0.0150 mg/L | 13/13 | LCR | 2023 |
| Barium | 24.73 µg/L 1.2% of the EPA limit 2000 µg/L
worst single sample: 25.9 µg/L | 7/8 | SYR4 | 2012–2019 |
| Fluoride | 980 µg/L 25% of the EPA limit 4000 µg/L
worst single sample: 1010 µg/L | 6/8 | SYR4 | 2012–2019 |
| Nitrate | 191 µg/L 1.9% of the EPA limit 10000 µg/L | 6/18 | SYR4 | 2012–2019 |
| Arsenic | 0.8850 µg/L 8.9% of the EPA limit 10 µg/L
worst single sample: 0.9000 µg/L | 2/9 | SYR4 | 2012–2019 |
| Combined Radium (-226 And -228) | 0.3500 pCi/L 7% of the EPA limit 5 pCi/L | 1/1 | SYR4 | 2018 |
| Gross Alpha, Excl. Radon And U | 0.8800 pCi/L 5.9% of the EPA limit 15 pCi/L | 1/1 | SYR4 | 2018 |
| Nitrate-Nitrite | 191 µg/L 1.9% of the EPA limit 10000 µg/L | 1/2 | SYR4 | 2015–2016 |
87 contaminants tested, none detected
Utility contact
Frequently asked questions about Grand Island Town Water Dept.
Is Grand Island Town Water Dept. tap water safe to drink?
EPA monitoring detected 19 contaminants in Grand Island Town Water Dept.'s water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Grand Island Town Water Dept.'s water?
EPA monitoring detected Total Haloacetic Acids (HAA5), Bromodichloromethane, Chloroform, Dibromochloromethane, TTHM, and others. The full list with the level and data source for each is above.
How many people does Grand Island Town Water Dept. serve?
Grand Island Town Water Dept. reports serving 19,500 people in New York, per its EPA record.
Has Grand Island Town Water Dept. had any water quality violations?
The EPA has 126 violations on file for Grand Island Town Water Dept., of which 3 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.