Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| Other | Monitoring | Resolved | 2010-09-02 |
| Other | Monitoring | Resolved | 2010-09-02 |
| MR | Monitoring | Resolved | 2007-06-01 |
| MR | Monitoring | Resolved | 2007-06-01 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate | 2018 µg/L 20% of the EPA limit 10000 µg/L
worst single sample: 2120 µg/L | 38/38 | SYR4 | 2012–2019 |
| Lead | 0.0490 mg/L 327% above the EPA limit of 0.0150 mg/L | 10/10 | LCR | 2024 |
| Barium | 71 µg/L 3.6% of the EPA limit 2000 µg/L
worst single sample: 75 µg/L | 9/9 | SYR4 | 2012–2019 |
| Bromodichloromethane | 4.205 µg/L No EPA limit set
worst single sample: 4.8 µg/L | 8/8 | SYR4 | 2012–2019 |
| TTHM | 12.0245 µg/L 15% of the EPA limit 80 µg/L
worst single sample: 13.4 µg/L | 8/8 | SYR4 | 2012–2019 |
| Arsenic | 0.9100 µg/L 9.1% of the EPA limit 10 µg/L
worst single sample: 1 µg/L | 7/9 | SYR4 | 2012–2019 |
| Dibromochloromethane | 2.5 µg/L No EPA limit set
worst single sample: 2.8 µg/L | 7/8 | SYR4 | 2012–2019 |
| Chloroform | 6.9925 µg/L No EPA limit set
worst single sample: 7.39 µg/L | 6/8 | SYR4 | 2012–2019 |
| Chromium | 9.87 µg/L 9.9% of the EPA limit 100 µg/L
worst single sample: 10.2 µg/L | 4/9 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 12.2 µg/L No EPA limit set
worst single sample: 14 µg/L | 4/8 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 12.2 µg/L 20% of the EPA limit 60 µg/L
worst single sample: 14 µg/L | 4/8 | SYR4 | 2012–2019 |
| Antimony, Total | 0.9500 µg/L 16% of the EPA limit 6 µg/L
worst single sample: 1 µg/L | 3/9 | SYR4 | 2012–2019 |
| Bromoform | 1.7 µg/L No EPA limit set | 1/8 | SYR4 | 2012–2019 |
| Cadmium | 0.0400 µg/L 0.8% of the EPA limit 5 µg/L | 1/9 | SYR4 | 2012–2019 |
| Fluoride | 90 µg/L 2.3% of the EPA limit 4000 µg/L | 1/9 | SYR4 | 2012–2019 |
| Selenium | 0.8000 µg/L 1.6% of the EPA limit 50 µg/L | 1/9 | SYR4 | 2012–2019 |
31 contaminants tested, none detected
Utility contact
Frequently asked questions about Valley Dale Water Co
Is Valley Dale Water Co tap water safe to drink?
EPA monitoring detected 16 contaminants in Valley Dale Water Co's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Valley Dale Water Co's water?
EPA monitoring detected Nitrate, Lead, Barium, Bromodichloromethane, TTHM, and others. The full list with the level and data source for each is above.
How many people does Valley Dale Water Co serve?
Valley Dale Water Co reports serving 500 people in New York, per its EPA record.
Has Valley Dale Water Co had any water quality violations?
The EPA has 4 violations on file for Valley Dale Water Co, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.