Tap WaterIndex

← New York

Tap water quality report

Hyde Park Regional

EPA monitoring tested this supplier for 103 contaminants and detected 19. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

103
contaminants tested
19
detected
6,928
people served
0
health-based violations
New York rankingsLead in New YorkPFAS in New York
Water source
Surface water
Ownership
Local government
Counties served
Dutchess

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

0
health-based violations
76
violations on file
0
still open
ViolationTypeStatusPeriod
Other Monitoring Resolved 2010-09-02
Other Monitoring Resolved 2010-09-02
MR Monitoring Resolved 2010-01-01 → 2010-12-31
MR Monitoring Resolved 2010-01-01 → 2010-12-31
MR Monitoring Resolved 2010-01-01 → 2010-12-31
MR Monitoring Resolved 2010-01-01 → 2010-12-31
MR Monitoring Resolved 2010-01-01 → 2010-12-31
MR Monitoring Resolved 2010-01-01 → 2010-12-31
MR Monitoring Resolved 2010-01-01 → 2010-12-31
MR Monitoring Resolved 2010-01-01 → 2010-12-31

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
TTHM
79 µg/L 99%
of the EPA limit 80 µg/L
worst single sample: 108.1 µg/L
65/65 SYR4 2012–2019
Bromodichloromethane
20.105 µg/L
No EPA limit set
worst single sample: 23.3 µg/L
64/64 SYR4 2012–2019
Chloroform
62.625 µg/L
No EPA limit set
worst single sample: 86.4 µg/L
64/64 SYR4 2012–2019
Total Haloacetic Acids (HAA5)
57.5 µg/L 96%
of the EPA limit 60 µg/L
worst single sample: 83 µg/L
63/63 SYR4 2012–2019
Dichloroacetic Acid
27.025 µg/L
No EPA limit set
worst single sample: 31.8 µg/L
56/57 SYR4 2012–2019
Trichloroacetic Acid
28 µg/L
No EPA limit set
worst single sample: 34 µg/L
55/56 SYR4 2012–2019
Dibromochloromethane
8.657 µg/L
No EPA limit set
worst single sample: 9.02 µg/L
35/62 SYR4 2012–2019
Nitrate
790 µg/L 7.9%
of the EPA limit 10000 µg/L
 16/16 SYR4 2012–2019
Lead
0.00080 mg/L 5.3%
of the EPA limit 0.0150 mg/L
 12/12 LCR 2025
Dibromoacetic Acid
3.15 µg/L
No EPA limit set
worst single sample: 3.7 µg/L
11/63 SYR4 2012–2019
Monobromoacetic Acid
24.83 µg/L
No EPA limit set
worst single sample: 26.9 µg/L
10/61 SYR4 2012–2019
Barium
22 µg/L 1.1%
of the EPA limit 2000 µg/L
 8/9 SYR4 2012–2019
Bromoform
1.034 µg/L
No EPA limit set
worst single sample: 1.04 µg/L
4/63 SYR4 2012–2019
Monochloroacetic Acid
2.93 µg/L
No EPA limit set
worst single sample: 3 µg/L
3/64 SYR4 2012–2019
Selenium
0.9850 µg/L 2%
of the EPA limit 50 µg/L
worst single sample: 1 µg/L
2/9 SYR4 2012–2019
2,4-D
0.2800 µg/L 0.4%
of the EPA limit 70 µg/L
 1/4 SYR4 2014–2019
Arsenic
0.4000 µg/L 4%
of the EPA limit 10 µg/L
 1/9 SYR4 2012–2019
Chromium
1 µg/L 1%
of the EPA limit 100 µg/L
 1/9 SYR4 2012–2019
Fluoride
30.8 µg/L 0.8%
of the EPA limit 4000 µg/L
 1/9 SYR4 2012–2019
84 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS2,4,5-TP4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaAntimony, TotalAsbestosAtrazineBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalChlorobenzeneCyanideCadmiumCarbofuranCarbon TetrachlorideChlordaneCombined Radium (-226 And -228)Combined UraniumDichloromethaneDalaponDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDinosebEthylene DibromideEndrinEthylbenzeneGross Beta Particle ActivityHexachlorobenzeneHfpo-DaHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorNetfosaaNfdhaNmefosaaOxamylPfbaPFBSPfdaPfdoaPfeesaPfhpaPfhpsPfhxaPFHXSPfmbaPfmpaPFNAPFOAPFOSPfpeaPfpesPftaPftrdaPfunaPentachlorophenolPicloramSimazineStyreneTetrachloroethyleneThallium, TotalTolueneTotal Polychlorinated Biphenyls (PCB)ToxapheneTrichloroethyleneVinyl Chloridecis-1,2-DichloroethyleneLithiumO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
CHURINS, JONATHAN
Phone
845-486-3624
Email
[email protected]

Frequently asked questions about Hyde Park Regional

Is Hyde Park Regional tap water safe to drink?

EPA monitoring detected 19 contaminants in Hyde Park Regional's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Hyde Park Regional's water?

EPA monitoring detected TTHM, Bromodichloromethane, Chloroform, Total Haloacetic Acids (HAA5), Dichloroacetic Acid, and others. The full list with the level and data source for each is above.

How many people does Hyde Park Regional serve?

Hyde Park Regional reports serving 6,928 people in New York, per its EPA record.

Has Hyde Park Regional had any water quality violations?

The EPA has 76 violations on file for Hyde Park Regional, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.