Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MR | Monitoring | Archived | 2025-07-01 → 2025-12-31 |
| MR | Monitoring | Archived | 2024-07-01 → 2024-12-31 |
| MR | Monitoring | Archived | 2024-07-01 → 2024-12-31 |
| MR | Monitoring | Archived | 2023-01-01 → 2023-06-30 |
| MR | Monitoring | Archived | 2023-01-01 → 2023-06-30 |
| MR | Monitoring | Resolved | 2023-01-01 → 2023-12-31 |
| MR | Monitoring | Resolved | 2023-01-01 → 2023-12-31 |
| MR | Monitoring | Resolved | 2023-01-01 → 2023-12-31 |
| MR | Monitoring | Resolved | 2023-01-01 → 2023-12-31 |
| MR | Monitoring | Resolved | 2020-07-01 → 2020-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 623 µg/L 48% of the EPA limit 1300 µg/L
worst single sample: 976 µg/L | 38/38 | SYR4 | 2012–2019 |
| Lead | 0.2200 mg/L 1467% above the EPA limit of 0.0150 mg/L | 34/34 | LCR | 2026 |
| Lead | 4.84 µg/L 32% of the EPA limit 15 µg/L
worst single sample: 7.4 µg/L | 29/35 | SYR4 | 2014–2019 |
| Chloroform | 0.3650 µg/L No EPA limit set
worst single sample: 0.4000 µg/L | 8/12 | SYR4 | 2012–2019 |
| Nitrate | 270 µg/L 2.7% of the EPA limit 10000 µg/L | 8/16 | SYR4 | 2012–2019 |
| Fluoride | 702.5 µg/L 18% of the EPA limit 4000 µg/L
worst single sample: 705 µg/L | 6/6 | SYR4 | 2012–2018 |
| TTHM | 0.7400 µg/L 0.9% of the EPA limit 80 µg/L
worst single sample: 0.8000 µg/L | 4/6 | SYR4 | 2014–2019 |
| Barium | 8.79 µg/L 0.4% of the EPA limit 2000 µg/L
worst single sample: 9 µg/L | 3/3 | SYR4 | 2012–2018 |
| Beryllium, Total | 1.343 µg/L 34% of the EPA limit 4 µg/L
worst single sample: 1.4 µg/L | 3/3 | SYR4 | 2012–2018 |
| Bromodichloromethane | 0.1900 µg/L No EPA limit set
worst single sample: 0.2000 µg/L | 3/12 | SYR4 | 2012–2019 |
| Combined Radium (-226 And -228) | 2.8665 pCi/L 57% of the EPA limit 5 pCi/L
worst single sample: 3 pCi/L | 2/2 | SYR4 | 2012–2015 |
| Selenium | 0.9085 µg/L 1.8% of the EPA limit 50 µg/L
worst single sample: 0.9400 µg/L | 2/3 | SYR4 | 2012–2018 |
| Arsenic | 0.2400 µg/L 2.4% of the EPA limit 10 µg/L | 1/3 | SYR4 | 2012–2018 |
| Dibromochloromethane | 0.2000 µg/L No EPA limit set | 1/12 | SYR4 | 2012–2019 |
| Toluene | 0.0500 µg/L 0% of the EPA limit 1000 µg/L | 1/6 | SYR4 | 2012–2018 |
35 contaminants tested, none detected
Utility contact
Frequently asked questions about Hillside Village
Is Hillside Village tap water safe to drink?
EPA monitoring detected 15 contaminants in Hillside Village's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Hillside Village's water?
EPA monitoring detected Copper, Lead, Lead, Chloroform, Nitrate, and others. The full list with the level and data source for each is above.
How many people does Hillside Village serve?
Hillside Village reports serving 75 people in New Jersey, per its EPA record.
Has Hillside Village had any water quality violations?
The EPA has 60 violations on file for Hillside Village, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.