Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 1996-11-01 → 1996-11-30 |
| MCL | Health-based | Resolved | 1996-11-01 → 1996-11-30 |
| MCL | Health-based | Resolved | 1996-11-01 → 1996-11-30 |
| MCL | Health-based | Resolved | 1996-11-01 → 1996-11-30 |
| MCL | Health-based | Resolved | 1996-11-01 → 1996-11-30 |
| MCL | Health-based | Resolved | 1996-11-01 → 1996-11-30 |
| MCL | Health-based | Resolved | 1996-11-01 → 1996-11-30 |
| MCL | Health-based | Resolved | 1996-11-01 → 1996-11-30 |
| MCL | Health-based | Resolved | 1996-10-01 → 1996-10-31 |
| MCL | Health-based | Resolved | 1996-10-01 → 1996-10-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| TTHM | 7.675 µg/L 9.6% of the EPA limit 80 µg/L
worst single sample: 9.86 µg/L | 34/42 | SYR4 | 2012–2019 |
| Chloroform | 2.816 µg/L No EPA limit set
worst single sample: 3.54 µg/L | 32/42 | SYR4 | 2012–2019 |
| Bromodichloromethane | 2.325 µg/L No EPA limit set
worst single sample: 2.77 µg/L | 31/42 | SYR4 | 2012–2019 |
| Dibromochloromethane | 2.01 µg/L No EPA limit set
worst single sample: 2.46 µg/L | 31/42 | SYR4 | 2012–2019 |
| Lead | 0.0035 mg/L 23% of the EPA limit 0.0150 mg/L | 16/16 | LCR | 2023 |
| Total Haloacetic Acids (HAA5) | 7.185 µg/L 12% of the EPA limit 60 µg/L
worst single sample: 9 µg/L | 16/42 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 2.633 µg/L No EPA limit set
worst single sample: 2.71 µg/L | 15/42 | SYR4 | 2012–2019 |
| Copper | 534.5 µg/L 41% of the EPA limit 1300 µg/L
worst single sample: 697 µg/L | 14/20 | SYR4 | 2014–2017 |
| Dibromoacetic Acid | 1.24 µg/L No EPA limit set
worst single sample: 1.34 µg/L | 9/42 | SYR4 | 2012–2019 |
| Bromoform | 1.097 µg/L No EPA limit set
worst single sample: 1.1 µg/L | 7/42 | SYR4 | 2012–2019 |
| Lead | 4.8455 µg/L 32% of the EPA limit 15 µg/L
worst single sample: 4.85 µg/L | 2/20 | SYR4 | 2014–2017 |
| Monobromoacetic Acid | 1.268 µg/L No EPA limit set
worst single sample: 1.28 µg/L | 2/42 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 4.3995 µg/L No EPA limit set
worst single sample: 4.55 µg/L | 2/42 | SYR4 | 2012–2019 |
31 contaminants tested, none detected
Utility contact
Frequently asked questions about Mount Arlington Boro Dpw Main
Is Mount Arlington Boro Dpw Main tap water safe to drink?
EPA monitoring detected 13 contaminants in Mount Arlington Boro Dpw Main's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Mount Arlington Boro Dpw Main's water?
EPA monitoring detected TTHM, Chloroform, Bromodichloromethane, Dibromochloromethane, Lead, and others. The full list with the level and data source for each is above.
How many people does Mount Arlington Boro Dpw Main serve?
Mount Arlington Boro Dpw Main reports serving 1,978 people in New Jersey, per its EPA record.
Has Mount Arlington Boro Dpw Main had any water quality violations?
The EPA has 73 violations on file for Mount Arlington Boro Dpw Main, of which 16 are health-based (a contaminant limit or required treatment was breached) and 1 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.