← New Jersey

Tap water quality report

Keyport Water Dept

EPA monitoring tested this supplier for 83 contaminants and detected 19. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

83
contaminants tested
19
detected
7,500
people served
14
health-based violations
Water source
SWP
Ownership
Local government
Counties served
Monmouth

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

14
health-based violations
86
violations on file
1
still open
ViolationTypeStatusPeriod
MCL Health-based Resolved 2007-05-01 → 2007-05-31
MCL Health-based Resolved 2007-05-01 → 2007-05-31
MCL Health-based Resolved 2007-05-01 → 2007-05-31
MCL Health-based Resolved 2007-05-01 → 2007-05-31
MCL Health-based Archived 2004-07-01 → 2004-07-31
MCL Health-based Resolved 1993-11-01 → 1993-11-30
MCL Health-based Resolved 1993-11-01 → 1993-11-30
MCL Health-based Resolved 1993-09-01 → 1993-09-30
MCL Health-based Resolved 1993-09-01 → 1993-09-30
MCL Health-based Resolved 1993-08-01 → 1993-08-31

PFAS detected

PFAS are industrial “forever chemicals”. These are the EPA's latest nationwide test results (2023–2025).
ContaminantMaxDetection ratePeriod
Pfhxa 0.0047 µg/L 2/5 2025
PFOA 0.0073 µg/L 2/5 2025
Pfpea 0.0043 µg/L 2/5 2025

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Bromodichloromethane
16.84 µg/L
No EPA limit set
worst single sample: 24.3 µg/L
70/70 SYR4 2012–2019
Copper
102.6 µg/L 7.9%
of the EPA limit 1300 µg/L
worst single sample: 127 µg/L
69/69 SYR4 2012–2018
Chloroform
78.405 µg/L
No EPA limit set
worst single sample: 96.9 µg/L
68/69 SYR4 2012–2019
Dibromochloromethane
7.3375 µg/L
No EPA limit set
worst single sample: 8.41 µg/L
68/70 SYR4 2012–2019
TTHM
98.85 µg/L 124%
of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 116.5 µg/L
64/64 SYR4 2012–2019
Dichloroacetic Acid
14.98 µg/L
No EPA limit set
worst single sample: 18.7 µg/L
47/64 SYR4 2012–2019
Total Haloacetic Acids (HAA5)
46.56 µg/L 78%
of the EPA limit 60 µg/L
worst single sample: 60 µg/L
47/64 SYR4 2012–2019
Trichloroacetic Acid
34.58 µg/L
No EPA limit set
worst single sample: 44.6 µg/L
35/64 SYR4 2012–2019
Bromoform
4.874 µg/L
No EPA limit set
worst single sample: 5.13 µg/L
25/70 SYR4 2012–2019
Lead
0.0 mg/L 0%
of the EPA limit 0.0150 mg/L
16/16 LCR 2026
Lead
5.2635 µg/L 35%
of the EPA limit 15 µg/L
worst single sample: 5.49 µg/L
4/67 SYR4 2012–2018
Barium
29.04 µg/L 1.5%
of the EPA limit 2000 µg/L
worst single sample: 29.1 µg/L
2/2 SYR4 2012–2015
Dibromoacetic Acid
1.38 µg/L
No EPA limit set
worst single sample: 1.4 µg/L
2/64 SYR4 2012–2019
Arsenic
1.28 µg/L 13%
of the EPA limit 10 µg/L
1/2 SYR4 2012–2015
Chromium
1.22 µg/L 1.2%
of the EPA limit 100 µg/L
1/2 SYR4 2012–2015
Combined Radium (-226 And -228)
1.5 pCi/L 30%
of the EPA limit 5 pCi/L
1/1 SYR4 2012
64 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaAntimony, TotalAsbestosBenzeneBeryllium, TotalChlorobenzeneCyanideCadmiumCarbon TetrachlorideDichloromethaneEthylene DibromideEthylbenzeneFluorideHfpo-DaMercuryMonobromoacetic AcidMonochloroacetic AcidNetfosaaNfdhaNmefosaaNitrateNitrate-NitriteNitritePfbaPFBSPfdaPfdoaPfeesaPfhpaPfhpsPFHXSPfmbaPfmpaPFNAPFOSPfpesPftaPftrdaPfunaSeleniumStyreneTetrachloroethyleneThallium, TotalTolueneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneLithiumO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
USSMAN, STEVE
Phone
732-787-3903

Frequently asked questions about Keyport Water Dept

Is Keyport Water Dept tap water safe to drink?

EPA monitoring detected 19 contaminants in Keyport Water Dept's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Keyport Water Dept's water?

EPA monitoring detected Bromodichloromethane, Copper, Chloroform, Dibromochloromethane, TTHM, and others. The full list with the level and data source for each is above.

How many people does Keyport Water Dept serve?

Keyport Water Dept reports serving 7,500 people in New Jersey, per its EPA record.

Has Keyport Water Dept had any water quality violations?

The EPA has 86 violations on file for Keyport Water Dept, of which 14 are health-based (a contaminant limit or required treatment was breached) and 1 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.