Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2018-09-21 |
| TT | Health-based | Resolved | 2018-09-21 |
| TT | Health-based | Resolved | 2018-09-21 |
| TT | Health-based | Resolved | 2018-09-21 |
| MCL | Health-based | Resolved | 2018-08-01 → 2018-08-31 |
| MCL | Health-based | Resolved | 2018-08-01 → 2018-08-31 |
| MCL | Health-based | Resolved | 2018-08-01 → 2018-08-31 |
| MCL | Health-based | Resolved | 2018-08-01 → 2018-08-31 |
| MCL | Health-based | Resolved | 2015-11-01 → 2015-11-30 |
| MCL | Health-based | Resolved | 2015-11-01 → 2015-11-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Chloroform | 4.548 µg/L No EPA limit set
worst single sample: 4.7 µg/L | 25/26 | SYR4 | 2012–2019 |
| Bromodichloromethane | 2.814 µg/L No EPA limit set
worst single sample: 2.9 µg/L | 24/26 | SYR4 | 2012–2019 |
| Dibromochloromethane | 1.6975 µg/L No EPA limit set
worst single sample: 2.03 µg/L | 20/26 | SYR4 | 2012–2019 |
| Copper | 244.2 µg/L 19% of the EPA limit 1300 µg/L
worst single sample: 282 µg/L | 19/24 | SYR4 | 2012–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 17/17 | LCR | 2024 |
| TTHM | 9.146 µg/L 11% of the EPA limit 80 µg/L
worst single sample: 9.2 µg/L | 10/10 | SYR4 | 2012–2019 |
| Fluoride | 282 µg/L 7% of the EPA limit 4000 µg/L
worst single sample: 290 µg/L | 9/16 | SYR4 | 2012–2019 |
| Barium | 71.96 µg/L 3.6% of the EPA limit 2000 µg/L
worst single sample: 72.1 µg/L | 8/9 | SYR4 | 2012–2019 |
| Lead | 5.155 µg/L 34% of the EPA limit 15 µg/L
worst single sample: 6.1 µg/L | 8/15 | SYR4 | 2012–2018 |
| Xylenes, Total | 0.9460 µg/L 0% of the EPA limit 10000 µg/L
worst single sample: 1 µg/L | 7/17 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 5.2475 µg/L No EPA limit set
worst single sample: 5.53 µg/L | 6/10 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 6.4 µg/L 11% of the EPA limit 60 µg/L
worst single sample: 6.7 µg/L | 6/10 | SYR4 | 2012–2019 |
| Selenium | 0.6040 µg/L 1.2% of the EPA limit 50 µg/L
worst single sample: 0.6100 µg/L | 4/9 | SYR4 | 2012–2019 |
| Ethylbenzene | 0.1180 µg/L 0% of the EPA limit 700 µg/L
worst single sample: 0.1200 µg/L | 3/17 | SYR4 | 2012–2019 |
| Toluene | 0.1900 µg/L 0% of the EPA limit 1000 µg/L
worst single sample: 0.2000 µg/L | 3/17 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 1.19 µg/L No EPA limit set
worst single sample: 1.2 µg/L | 3/10 | SYR4 | 2012–2019 |
| Arsenic | 0.1370 µg/L 1.4% of the EPA limit 10 µg/L
worst single sample: 0.1400 µg/L | 2/9 | SYR4 | 2012–2019 |
| Bromoform | 0.1270 µg/L No EPA limit set
worst single sample: 0.1300 µg/L | 2/26 | SYR4 | 2012–2019 |
| Mercury | 0.0706 µg/L 3.5% of the EPA limit 2 µg/L
worst single sample: 0.0720 µg/L | 2/9 | SYR4 | 2012–2019 |
| Nitrate | 300 µg/L 3% of the EPA limit 10000 µg/L | 2/18 | SYR4 | 2012–2019 |
| Benzene | 0.1000 µg/L 2% of the EPA limit 5 µg/L | 1/17 | SYR4 | 2012–2019 |
| Chromium | 1.1 µg/L 1.1% of the EPA limit 100 µg/L | 1/9 | SYR4 | 2012–2019 |
| Combined Radium (-226 And -228) | 1.5 pCi/L 30% of the EPA limit 5 pCi/L | 1/2 | SYR4 | 2012–2018 |
| Combined Uranium | 0.2533 µg/L 0.8% of the EPA limit 30 µg/L | 1/1 | SYR4 | 2012 |
| Dichloromethane | 6.5 µg/L 130% of the EPA limit, at the 95th percentile of samples — 5 µg/L | 1/17 | SYR4 | 2012–2019 |
| Di(2-ethylhexyl) Adipate | 0.0690 µg/L 0% of the EPA limit 400 µg/L | 1/1 | SYR4 | 2013 |
| Di(2-ethylhexyl) Phthalate | 0.2040 µg/L 3.4% of the EPA limit 6 µg/L | 1/1 | SYR4 | 2013 |
| Monobromoacetic Acid | 1.42 µg/L No EPA limit set | 1/10 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 0.6600 µg/L No EPA limit set | 1/10 | SYR4 | 2012–2019 |
| Thallium, Total | 0.1400 µg/L 7% of the EPA limit 2 µg/L | 1/9 | SYR4 | 2012–2019 |
43 contaminants tested, none detected
Utility contact
Frequently asked questions about Brandywine Assisted Living at Colts Neck
Is Brandywine Assisted Living at Colts Neck tap water safe to drink?
EPA monitoring detected 30 contaminants in Brandywine Assisted Living at Colts Neck's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Brandywine Assisted Living at Colts Neck's water?
EPA monitoring detected Chloroform, Bromodichloromethane, Dibromochloromethane, Copper, Lead, and others. The full list with the level and data source for each is above.
How many people does Brandywine Assisted Living at Colts Neck serve?
Brandywine Assisted Living at Colts Neck reports serving 85 people in New Jersey, per its EPA record.
Has Brandywine Assisted Living at Colts Neck had any water quality violations?
The EPA has 83 violations on file for Brandywine Assisted Living at Colts Neck, of which 22 are health-based (a contaminant limit or required treatment was breached) and 2 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.