Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
269
health-based violations
838
violations on file
1
still open
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2009-10-01 → 2009-12-31 |
| MCL | Health-based | Resolved | 2009-10-01 → 2009-12-31 |
| MCL | Health-based | Resolved | 2009-10-01 → 2009-12-31 |
| MCL | Health-based | Resolved | 2009-10-01 → 2009-12-31 |
| MCL | Health-based | Resolved | 2009-10-01 → 2009-12-31 |
| MCL | Health-based | Resolved | 2009-10-01 → 2009-12-31 |
| MCL | Health-based | Resolved | 2009-10-01 → 2009-12-31 |
| MCL | Health-based | Resolved | 2009-10-01 → 2009-12-31 |
| MCL | Health-based | Resolved | 2009-10-01 → 2009-12-31 |
| MCL | Health-based | Resolved | 2009-10-01 → 2009-12-31 |
PFAS detected
PFAS are industrial “forever chemicals”. These are the EPA's latest
nationwide test results (2023–2025).
Other contaminants detected
Each bar shows the measured level as a share of the EPA limit: green is
well under, amber is close to it, red is over. For lead and copper the
limit applies to exactly the 90th-percentile figure shown, so red there
means a real exceedance. For everything else the limit applies to a
running annual average while the figure is the 95th percentile of this
system's samples — over 100% is worth reading, but is not by itself a
violation. Where a single sample came in higher than that percentile, it
is noted under the bar. Formal violations are listed separately.
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Bromoform | 15 µg/L No EPA limit set
worst single sample: 29 µg/L | 141/149 | SYR4 | 2012–2019 |
| Dibromochloromethane | 10.83 µg/L No EPA limit set
worst single sample: 15 µg/L | 138/149 | SYR4 | 2012–2019 |
| Arsenic | 4.545 µg/L 45% of the EPA limit 10 µg/L
worst single sample: 5 µg/L | 112/137 | SYR4 | 2012–2019 |
| Bromodichloromethane | 5.7 µg/L No EPA limit set
worst single sample: 8.1 µg/L | 112/149 | SYR4 | 2012–2019 |
| Chloroform | 2.942 µg/L No EPA limit set
worst single sample: 8.07 µg/L | 89/149 | SYR4 | 2012–2019 |
| Copper | 484.8 µg/L 37% of the EPA limit 1300 µg/L
worst single sample: 636 µg/L | 72/72 | SYR4 | 2012–2018 |
| TTHM | 39 µg/L 49% of the EPA limit 80 µg/L
worst single sample: 49 µg/L | 63/63 | SYR4 | 2012–2019 |
| Nitrate | 2214 µg/L 22% of the EPA limit 10000 µg/L
worst single sample: 2520 µg/L | 62/62 | SYR4 | 2012–2019 |
| Lead | 10.745 µg/L 72% of the EPA limit 15 µg/L
worst single sample: 51 µg/L | 60/60 | SYR4 | 2012–2018 |
| Dibromoacetic Acid | 3.715 µg/L No EPA limit set
worst single sample: 4.75 µg/L | 58/63 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 4.036 µg/L 6.7% of the EPA limit 60 µg/L
worst single sample: 5.85 µg/L | 58/63 | SYR4 | 2012–2019 |
| Lead | 0.0034 mg/L 23% of the EPA limit 0.0150 mg/L | 14/14 | LCR | 2024 |
| Barium | 462.05 µg/L 23% of the EPA limit 2000 µg/L
worst single sample: 555 µg/L | 12/12 | SYR4 | 2012–2018 |
| Monobromoacetic Acid | 0.5430 µg/L No EPA limit set
worst single sample: 0.6200 µg/L | 12/63 | SYR4 | 2012–2019 |
| Selenium | 8.085 µg/L 16% of the EPA limit 50 µg/L
worst single sample: 11 µg/L | 12/12 | SYR4 | 2012–2018 |
| Dichloroacetic Acid | 1.3715 µg/L No EPA limit set
worst single sample: 1.52 µg/L | 10/63 | SYR4 | 2012–2019 |
| Fluoride | 185.48 µg/L 4.6% of the EPA limit 4000 µg/L
worst single sample: 260 µg/L | 9/24 | SYR4 | 2012–2018 |
| Lithium | 60.1 µg/L No EPA limit set | 8/8 | UCMR-5 | 2024 |
| Carbon Tetrachloride | 0.1000 µg/L 2% of the EPA limit 5 µg/L | 7/89 | SYR4 | 2012–2019 |
| Combined Radium (-226 And -228) | 4.148 pCi/L 83% of the EPA limit 5 pCi/L
worst single sample: 4.16 pCi/L | 5/8 | SYR4 | 2012–2018 |
| Cadmium | 0.0185 µg/L 0.4% of the EPA limit 5 µg/L
worst single sample: 0.0200 µg/L | 4/12 | SYR4 | 2012–2018 |
| Chromium | 37.38 µg/L 37% of the EPA limit 100 µg/L
worst single sample: 43.5 µg/L | 4/12 | SYR4 | 2012–2018 |
| Xylenes, Total | 1.1355 µg/L 0% of the EPA limit 10000 µg/L
worst single sample: 1.2 µg/L | 4/89 | SYR4 | 2012–2019 |
| Ethylbenzene | 0.1940 µg/L 0% of the EPA limit 700 µg/L
worst single sample: 0.2000 µg/L | 3/89 | SYR4 | 2012–2019 |
| Thallium, Total | 0.0690 µg/L 3.5% of the EPA limit 2 µg/L
worst single sample: 0.0700 µg/L | 3/12 | SYR4 | 2012–2018 |
| Ethylene Dibromide | 0.0375 µg/L 75% of the EPA limit 0.0500 µg/L
worst single sample: 0.0380 µg/L | 2/59 | SYR4 | 2012–2019 |
| Mercury | 0.0396 µg/L 2% of the EPA limit 2 µg/L
worst single sample: 0.0400 µg/L | 2/12 | SYR4 | 2012–2018 |
| Toluene | 2.1315 µg/L 0.2% of the EPA limit 1000 µg/L
worst single sample: 2.23 µg/L | 2/89 | SYR4 | 2012–2019 |
| Trichloroethylene | 0.1965 µg/L 3.9% of the EPA limit 5 µg/L
worst single sample: 0.2000 µg/L | 2/89 | SYR4 | 2012–2019 |
| Tetrachloroethylene | 1.11 µg/L 22% of the EPA limit 5 µg/L | 1/89 | SYR4 | 2012–2019 |
| cis-1,2-Dichloroethylene | 0.1000 µg/L 0.1% of the EPA limit 70 µg/L | 1/89 | SYR4 | 2012–2019 |
44 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaAntimony, TotalAsbestosBenzeneBeryllium, TotalChlorobenzeneCyanideDichloromethaneHfpo-DaMonochloroacetic AcidNetfosaaNfdhaNmefosaaPfbaPfdaPfdoaPfeesaPfhpaPfhpsPfmbaPfmpaPFNAPfpesPftaPftrdaPfunaStyreneTrichloroacetic AcidVinyl ChlorideO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene
Utility contact
Frequently asked questions about Flemington Water Department
Is Flemington Water Department tap water safe to drink?
EPA monitoring detected 37 contaminants in Flemington Water Department's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Flemington Water Department's water?
EPA monitoring detected Bromoform, Dibromochloromethane, Arsenic, Bromodichloromethane, Chloroform, and others. The full list with the level and data source for each is above.
How many people does Flemington Water Department serve?
Flemington Water Department reports serving 4,581 people in New Jersey, per its EPA record.
Has Flemington Water Department had any water quality violations?
The EPA has 838 violations on file for Flemington Water Department, of which 269 are health-based (a contaminant limit or required treatment was breached) and 1 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.