Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2023-01-01 → 2023-06-30 |
| TT | Health-based | Resolved | 2023-01-01 → 2023-06-30 |
| TT | Health-based | Resolved | 2023-01-01 → 2023-06-30 |
| TT | Health-based | Resolved | 2023-01-01 → 2023-06-30 |
| TT | Health-based | Resolved | 2022-07-01 → 2022-12-31 |
| TT | Health-based | Resolved | 2022-07-01 → 2022-12-31 |
| TT | Health-based | Resolved | 2022-07-01 → 2022-12-31 |
| TT | Health-based | Resolved | 2022-07-01 → 2022-12-31 |
| TT | Health-based | Resolved | 2022-07-01 → 2022-12-31 |
| TT | Health-based | Resolved | 2022-07-01 → 2022-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 162.7 µg/L 13% of the EPA limit 1300 µg/L
worst single sample: 565 µg/L | 434/436 | SYR4 | 2012–2019 |
| Lead | 22 µg/L 147% of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 168 µg/L | 401/422 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 29.7 µg/L No EPA limit set
worst single sample: 32 µg/L | 127/127 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 81 µg/L 135% of the EPA limit, at the 95th percentile of samples — 60 µg/L
worst single sample: 109 µg/L | 127/127 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 56 µg/L No EPA limit set
worst single sample: 73 µg/L | 127/127 | SYR4 | 2012–2019 |
| Bromodichloromethane | 11.075 µg/L No EPA limit set
worst single sample: 13.7 µg/L | 126/126 | SYR4 | 2012–2019 |
| Chloroform | 99.95 µg/L No EPA limit set
worst single sample: 120 µg/L | 126/126 | SYR4 | 2012–2019 |
| TTHM | 111.2 µg/L 139% of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 131 µg/L | 126/126 | SYR4 | 2012–2019 |
| Dibromochloromethane | 1.17 µg/L No EPA limit set
worst single sample: 1.55 µg/L | 87/126 | SYR4 | 2012–2019 |
| Lead | 0.0016 mg/L 11% of the EPA limit 0.0150 mg/L | 45/45 | LCR | 2026 |
| Monochloroacetic Acid | 3.9 µg/L No EPA limit set
worst single sample: 4.3 µg/L | 31/127 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 0.4465 µg/L No EPA limit set
worst single sample: 0.4600 µg/L | 4/127 | SYR4 | 2012–2019 |
32 contaminants tested, none detected
Utility contact
Frequently asked questions about Belleville Water Dept
Is Belleville Water Dept tap water safe to drink?
EPA monitoring detected 12 contaminants in Belleville Water Dept's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Belleville Water Dept's water?
EPA monitoring detected Copper, Lead, Dichloroacetic Acid, Total Haloacetic Acids (HAA5), Trichloroacetic Acid, and others. The full list with the level and data source for each is above.
How many people does Belleville Water Dept serve?
Belleville Water Dept reports serving 35,129 people in New Jersey, per its EPA record.
Has Belleville Water Dept had any water quality violations?
The EPA has 473 violations on file for Belleville Water Dept, of which 147 are health-based (a contaminant limit or required treatment was breached) and 18 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.