Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2024-07-01 → 2024-12-31 |
| TT | Health-based | Resolved | 2024-07-01 → 2024-12-31 |
| TT | Health-based | Resolved | 2024-07-01 → 2024-12-31 |
| TT | Health-based | Resolved | 2024-07-01 → 2024-12-31 |
| TT | Health-based | Resolved | 2014-12-01 → 2014-12-31 |
| TT | Health-based | Resolved | 2014-12-01 → 2014-12-31 |
| TT | Health-based | Resolved | 2014-12-01 → 2014-12-31 |
| TT | Health-based | Resolved | 2014-12-01 → 2014-12-31 |
| MCL | Health-based | Resolved | 2014-09-01 → 2014-09-30 |
| MCL | Health-based | Resolved | 2014-09-01 → 2014-09-30 |
PFAS detected
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 239.2 µg/L 18% of the EPA limit 1300 µg/L
worst single sample: 1590 µg/L | 333/346 | SYR4 | 2012–2019 |
| Bromodichloromethane | 17.46 µg/L No EPA limit set
worst single sample: 20.6 µg/L | 125/125 | SYR4 | 2012–2019 |
| Chloroform | 41.36 µg/L No EPA limit set
worst single sample: 51.4 µg/L | 125/125 | SYR4 | 2012–2019 |
| TTHM | 67.74 µg/L 85% of the EPA limit 80 µg/L
worst single sample: 74.7 µg/L | 125/125 | SYR4 | 2012–2019 |
| Dibromochloromethane | 8.21 µg/L No EPA limit set
worst single sample: 11.3 µg/L | 121/125 | SYR4 | 2012–2019 |
| Lead | 18.94 µg/L 126% of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 250 µg/L | 97/346 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 20.45 µg/L No EPA limit set
worst single sample: 29.4 µg/L | 92/125 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 33.45 µg/L 56% of the EPA limit 60 µg/L
worst single sample: 37 µg/L | 92/125 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 11.04 µg/L No EPA limit set
worst single sample: 16 µg/L | 87/125 | SYR4 | 2012–2019 |
| Bromoform | 1.195 µg/L No EPA limit set
worst single sample: 1.81 µg/L | 56/125 | SYR4 | 2012–2019 |
| Lead | 0.0020 mg/L 13% of the EPA limit 0.0150 mg/L | 24/24 | LCR | 2026 |
| Dibromoacetic Acid | 2.8675 µg/L No EPA limit set
worst single sample: 3.32 µg/L | 6/125 | SYR4 | 2012–2019 |
| Monobromoacetic Acid | 0.7000 µg/L No EPA limit set | 1/125 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 23.2 µg/L No EPA limit set | 1/125 | SYR4 | 2012–2019 |
23 contaminants tested, none detected
Utility contact
Frequently asked questions about Saddle Brook Water Dept
Is Saddle Brook Water Dept tap water safe to drink?
EPA monitoring detected 21 contaminants in Saddle Brook Water Dept's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Saddle Brook Water Dept's water?
EPA monitoring detected Copper, Bromodichloromethane, Chloroform, TTHM, Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does Saddle Brook Water Dept serve?
Saddle Brook Water Dept reports serving 13,155 people in New Jersey, per its EPA record.
Has Saddle Brook Water Dept had any water quality violations?
The EPA has 160 violations on file for Saddle Brook Water Dept, of which 54 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.