Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 1991-04-01 → 1991-04-30 |
| MCL | Health-based | Resolved | 1991-04-01 → 1991-04-30 |
| MCL | Health-based | Resolved | 1991-04-01 → 1991-04-30 |
| MCL | Health-based | Resolved | 1991-04-01 → 1991-04-30 |
| MCL | Health-based | Resolved | 1991-04-01 → 1991-04-30 |
| MCL | Health-based | Resolved | 1991-04-01 → 1991-04-30 |
| MCL | Health-based | Resolved | 1991-04-01 → 1991-04-30 |
| MCL | Health-based | Resolved | 1991-03-01 → 1991-03-31 |
| MCL | Health-based | Resolved | 1991-03-01 → 1991-03-31 |
| MCL | Health-based | Resolved | 1991-03-01 → 1991-03-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate | 3600 µg/L 36% of the EPA limit 10000 µg/L
worst single sample: 3900 µg/L | 58/60 | SYR4 | 2014–2019 |
| Copper | 197 µg/L 15% of the EPA limit 1300 µg/L
worst single sample: 340 µg/L | 24/24 | SYR4 | 2014–2018 |
| Lead | 8.175 µg/L 55% of the EPA limit 15 µg/L
worst single sample: 15 µg/L | 16/20 | SYR4 | 2015–2018 |
| Bromodichloromethane | 1.25 µg/L No EPA limit set
worst single sample: 1.3 µg/L | 6/18 | SYR4 | 2014–2019 |
| Dibromochloromethane | 1.75 µg/L No EPA limit set
worst single sample: 1.8 µg/L | 6/18 | SYR4 | 2014–2019 |
| TTHM | 4.1 µg/L 5.1% of the EPA limit 80 µg/L
worst single sample: 4.2 µg/L | 6/6 | SYR4 | 2014–2019 |
| Barium | 9.85 µg/L 0.5% of the EPA limit 2000 µg/L
worst single sample: 10 µg/L | 4/4 | SYR4 | 2014–2017 |
| Chloroform | 0.7840 µg/L No EPA limit set
worst single sample: 0.8000 µg/L | 3/18 | SYR4 | 2014–2019 |
| Bromoform | 1.185 µg/L No EPA limit set
worst single sample: 1.2 µg/L | 2/18 | SYR4 | 2014–2019 |
| Combined Radium (-226 And -228) | 0.1950 pCi/L 3.9% of the EPA limit 5 pCi/L
worst single sample: 0.2000 pCi/L | 2/2 | SYR4 | 2016 |
| Fluoride | 129.5 µg/L 3.2% of the EPA limit 4000 µg/L
worst single sample: 130 µg/L | 2/4 | SYR4 | 2014–2017 |
| Combined Uranium | 1.5 µg/L 5% of the EPA limit 30 µg/L | 1/2 | SYR4 | 2016 |
| Gross Alpha, Excl. Radon And U | 1.2 pCi/L 8% of the EPA limit 15 pCi/L | 1/2 | SYR4 | 2016 |
62 contaminants tested, none detected
Utility contact
Frequently asked questions about Walpole Water Dept
Is Walpole Water Dept tap water safe to drink?
EPA monitoring detected 13 contaminants in Walpole Water Dept's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Walpole Water Dept's water?
EPA monitoring detected Nitrate, Copper, Lead, Bromodichloromethane, Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does Walpole Water Dept serve?
Walpole Water Dept reports serving 1,057 people in New Hampshire, per its EPA record.
Has Walpole Water Dept had any water quality violations?
The EPA has 531 violations on file for Walpole Water Dept, of which 15 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.