Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2010-11-01 → 2010-11-30 |
| MCL | Health-based | Resolved | 2010-11-01 → 2010-11-30 |
| MCL | Health-based | Resolved | 2010-11-01 → 2010-11-30 |
| MCL | Health-based | Resolved | 2010-11-01 → 2010-11-30 |
| MCL | Health-based | Resolved | 2010-09-01 → 2010-09-30 |
| MCL | Health-based | Resolved | 2010-09-01 → 2010-09-30 |
| MCL | Health-based | Resolved | 2010-09-01 → 2010-09-30 |
| MCL | Health-based | Resolved | 2010-09-01 → 2010-09-30 |
| MCL | Health-based | Resolved | 2010-06-01 → 2010-06-30 |
| MCL | Health-based | Resolved | 2010-06-01 → 2010-06-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 679.8 µg/L 52% of the EPA limit 1300 µg/L
worst single sample: 768 µg/L | 13/13 | SYR4 | 2014–2018 |
| Nitrate | 4070 µg/L 41% of the EPA limit 10000 µg/L | 12/12 | SYR4 | 2014–2019 |
| Lead | 4.589 µg/L 31% of the EPA limit 15 µg/L
worst single sample: 4.67067 µg/L | 7/11 | SYR4 | 2014–2017 |
| Bromodichloromethane | 2.79 µg/L No EPA limit set
worst single sample: 3 µg/L | 4/4 | SYR4 | 2015–2018 |
| Chloroform | 2.205 µg/L No EPA limit set
worst single sample: 2.4 µg/L | 4/4 | SYR4 | 2015–2018 |
| Dibromochloromethane | 2.365 µg/L No EPA limit set
worst single sample: 2.5 µg/L | 4/4 | SYR4 | 2015–2018 |
| TTHM | 7.36 µg/L 9.2% of the EPA limit 80 µg/L
worst single sample: 7.9 µg/L | 4/4 | SYR4 | 2015–2018 |
| Arsenic | 3.365 µg/L 34% of the EPA limit 10 µg/L
worst single sample: 3.4 µg/L | 2/2 | SYR4 | 2015–2018 |
| Barium | 39.755 µg/L 2% of the EPA limit 2000 µg/L
worst single sample: 40.8 µg/L | 2/2 | SYR4 | 2015–2018 |
| Combined Uranium | 1.78 µg/L 5.9% of the EPA limit 30 µg/L
worst single sample: 1.8 µg/L | 2/2 | SYR4 | 2016–2019 |
64 contaminants tested, none detected
Utility contact
Frequently asked questions about Hill Top
Is Hill Top tap water safe to drink?
EPA monitoring detected 10 contaminants in Hill Top's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Hill Top's water?
EPA monitoring detected Copper, Nitrate, Lead, Bromodichloromethane, Chloroform, and others. The full list with the level and data source for each is above.
How many people does Hill Top serve?
Hill Top reports serving 140 people in New Hampshire, per its EPA record.
Has Hill Top had any water quality violations?
The EPA has 33 violations on file for Hill Top, of which 25 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.