Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2002-08-01 → 2002-08-31 |
| TT | Health-based | Resolved | 2002-08-01 → 2002-08-31 |
| TT | Health-based | Resolved | 2002-08-01 → 2002-08-31 |
| MR | Monitoring | Resolved | 2008-10-01 |
| MR | Monitoring | Resolved | 2008-10-01 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Bromodichloromethane | 15 µg/L No EPA limit set
worst single sample: 17 µg/L | 187/193 | SYR4 | 2014–2019 |
| Chloroform | 41 µg/L No EPA limit set
worst single sample: 52 µg/L | 187/193 | SYR4 | 2014–2019 |
| Dibromochloromethane | 5.27 µg/L No EPA limit set
worst single sample: 6.6 µg/L | 187/193 | SYR4 | 2014–2019 |
| TTHM | 61.75 µg/L 77% of the EPA limit 80 µg/L
worst single sample: 72 µg/L | 186/192 | SYR4 | 2014–2019 |
| Total Haloacetic Acids (HAA5) | 21.8 µg/L 36% of the EPA limit 60 µg/L
worst single sample: 30 µg/L | 181/183 | SYR4 | 2014–2019 |
| Dichloroacetic Acid | 12 µg/L No EPA limit set
worst single sample: 17 µg/L | 169/177 | SYR4 | 2014–2019 |
| Trichloroacetic Acid | 9.9844 µg/L No EPA limit set
worst single sample: 13 µg/L | 167/176 | SYR4 | 2014–2019 |
| Copper | 96.06 µg/L 7.4% of the EPA limit 1300 µg/L
worst single sample: 274.882 µg/L | 65/66 | SYR4 | 2014–2019 |
| Dibromoacetic Acid | 1.96113 µg/L No EPA limit set
worst single sample: 2.2 µg/L | 52/177 | SYR4 | 2014–2019 |
| Bromoform | 0.9450 µg/L No EPA limit set
worst single sample: 1.2 µg/L | 32/193 | SYR4 | 2014–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 14/14 | LCR | 2023 |
| Nitrate | 680 µg/L 6.8% of the EPA limit 10000 µg/L | 12/24 | SYR4 | 2014–2019 |
| Lead | 59.538 µg/L 397% of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 82.8013 µg/L | 8/62 | SYR4 | 2014–2017 |
| Barium | 12.2273 µg/L 0.6% of the EPA limit 2000 µg/L
worst single sample: 12.3 µg/L | 2/4 | SYR4 | 2015–2019 |
| Combined Radium (-226 And -228) | 0.5000 pCi/L 10% of the EPA limit 5 pCi/L | 1/2 | SYR4 | 2015–2016 |
92 contaminants tested, none detected
Utility contact
Frequently asked questions about Pennichuck Water Works
Is Pennichuck Water Works tap water safe to drink?
EPA monitoring detected 15 contaminants in Pennichuck Water Works's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Pennichuck Water Works's water?
EPA monitoring detected Bromodichloromethane, Chloroform, Dibromochloromethane, TTHM, Total Haloacetic Acids (HAA5), and others. The full list with the level and data source for each is above.
How many people does Pennichuck Water Works serve?
Pennichuck Water Works reports serving 88,853 people in New Hampshire, per its EPA record.
Has Pennichuck Water Works had any water quality violations?
The EPA has 5 violations on file for Pennichuck Water Works, of which 3 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.