Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2022-10-01 → 2022-12-31 |
| MCL | Health-based | Resolved | 2022-10-01 → 2022-12-31 |
| MCL | Health-based | Resolved | 2022-10-01 → 2022-12-31 |
| MCL | Health-based | Resolved | 2022-10-01 → 2022-12-31 |
| MCL | Health-based | Resolved | 2022-07-01 → 2022-09-30 |
| MCL | Health-based | Resolved | 2022-07-01 → 2022-09-30 |
| MCL | Health-based | Resolved | 2022-07-01 → 2022-09-30 |
| MCL | Health-based | Resolved | 2022-07-01 → 2022-09-30 |
| MCL | Health-based | Resolved | 2021-10-01 → 2021-12-31 |
| MCL | Health-based | Resolved | 2021-10-01 → 2021-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 220.6 µg/L 17% of the EPA limit 1300 µg/L
worst single sample: 238.69 µg/L | 37/41 | SYR4 | 2014–2019 |
| Chloroform | 98 µg/L No EPA limit set
worst single sample: 114 µg/L | 21/22 | SYR4 | 2015–2019 |
| TTHM | 100 µg/L 125% of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 115 µg/L | 21/22 | SYR4 | 2015–2019 |
| Bromodichloromethane | 2.51 µg/L No EPA limit set
worst single sample: 2.6 µg/L | 19/22 | SYR4 | 2015–2019 |
| Total Haloacetic Acids (HAA5) | 108.34 µg/L 181% of the EPA limit, at the 95th percentile of samples — 60 µg/L
worst single sample: 111.4 µg/L | 19/19 | SYR4 | 2015–2019 |
| Trichloroacetic Acid | 70.1 µg/L No EPA limit set
worst single sample: 71 µg/L | 19/19 | SYR4 | 2015–2019 |
| Dichloroacetic Acid | 34.8 µg/L No EPA limit set
worst single sample: 38 µg/L | 17/19 | SYR4 | 2015–2019 |
| Lead | 30.7 µg/L 205% of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 43.3 µg/L | 16/41 | SYR4 | 2014–2019 |
| Monochloroacetic Acid | 6.66 µg/L No EPA limit set
worst single sample: 7.5 µg/L | 7/19 | SYR4 | 2015–2019 |
| Barium | 4 µg/L 0.2% of the EPA limit 2000 µg/L | 2/6 | SYR4 | 2014–2019 |
| Lead | 0.0350 mg/L 233% above the EPA limit of 0.0150 mg/L | 2/2 | LCR | 2015 |
| Bromoform | 1 µg/L No EPA limit set | 1/22 | SYR4 | 2015–2019 |
| Dibromoacetic Acid | 16 µg/L No EPA limit set | 1/19 | SYR4 | 2015–2019 |
| Dibromochloromethane | 1 µg/L No EPA limit set | 1/22 | SYR4 | 2015–2019 |
61 contaminants tested, none detected
Utility contact
Frequently asked questions about Jackson Water Pct
Is Jackson Water Pct tap water safe to drink?
EPA monitoring detected 14 contaminants in Jackson Water Pct's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Jackson Water Pct's water?
EPA monitoring detected Copper, Chloroform, TTHM, Bromodichloromethane, Total Haloacetic Acids (HAA5), and others. The full list with the level and data source for each is above.
How many people does Jackson Water Pct serve?
Jackson Water Pct reports serving 500 people in New Hampshire, per its EPA record.
Has Jackson Water Pct had any water quality violations?
The EPA has 64 violations on file for Jackson Water Pct, of which 46 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.