Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2015-10-01 → 2015-12-31 |
| MCL | Health-based | Resolved | 2015-10-01 → 2015-12-31 |
| MCL | Health-based | Resolved | 2015-10-01 → 2015-12-31 |
| MCL | Health-based | Resolved | 2015-10-01 → 2015-12-31 |
| MCL | Health-based | Resolved | 2015-07-01 → 2015-09-30 |
| MCL | Health-based | Resolved | 2015-07-01 → 2015-09-30 |
| MCL | Health-based | Resolved | 2015-07-01 → 2015-09-30 |
| MCL | Health-based | Resolved | 2015-07-01 → 2015-09-30 |
| MCL | Health-based | Resolved | 2015-04-01 → 2015-06-30 |
| MCL | Health-based | Resolved | 2015-04-01 → 2015-06-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Arsenic | 67.35 µg/L 674% of the EPA limit, at the 95th percentile of samples — 10 µg/L
worst single sample: 410 µg/L | 34/34 | SYR4 | 2014–2019 |
| Copper | 166 µg/L 13% of the EPA limit 1300 µg/L
worst single sample: 210 µg/L | 12/13 | SYR4 | 2015–2019 |
| Ethylbenzene | 6.6 µg/L 0.9% of the EPA limit 700 µg/L
worst single sample: 6.8 µg/L | 11/14 | SYR4 | 2014–2019 |
| Dibromochloromethane | 2.565 µg/L No EPA limit set
worst single sample: 2.7 µg/L | 4/8 | SYR4 | 2014–2019 |
| Barium | 33.5 µg/L 1.7% of the EPA limit 2000 µg/L
worst single sample: 34 µg/L | 3/3 | SYR4 | 2015–2019 |
| Bromodichloromethane | 1.83 µg/L No EPA limit set
worst single sample: 1.9 µg/L | 3/8 | SYR4 | 2014–2019 |
| Bromoform | 1.45 µg/L No EPA limit set
worst single sample: 1.5 µg/L | 3/8 | SYR4 | 2014–2019 |
| Fluoride | 1390 µg/L 35% of the EPA limit 4000 µg/L
worst single sample: 1400 µg/L | 3/3 | SYR4 | 2015–2019 |
| Lead | 0.0530 mg/L 353% above the EPA limit of 0.0150 mg/L | 3/3 | LCR | 2005 |
| Xylenes, Total | 26.3 µg/L 0.3% of the EPA limit 10000 µg/L
worst single sample: 28 µg/L | 3/8 | SYR4 | 2014–2019 |
| Lead | 5.8 µg/L 39% of the EPA limit 15 µg/L
worst single sample: 6 µg/L | 2/11 | SYR4 | 2015–2019 |
| Chloroform | 0.8000 µg/L No EPA limit set | 1/8 | SYR4 | 2014–2019 |
| Combined Uranium | 10 µg/L 33% of the EPA limit 30 µg/L | 1/1 | SYR4 | 2017 |
| Gross Alpha, Excl. Radon And U | 6.2 pCi/L 41% of the EPA limit 15 pCi/L | 1/1 | SYR4 | 2017 |
| TTHM | 6.9 µg/L 8.6% of the EPA limit 80 µg/L | 1/4 | SYR4 | 2016–2019 |
60 contaminants tested, none detected
Utility contact
Frequently asked questions about Bella Brook Water
Is Bella Brook Water tap water safe to drink?
EPA monitoring detected 15 contaminants in Bella Brook Water's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Bella Brook Water's water?
EPA monitoring detected Arsenic, Copper, Ethylbenzene, Dibromochloromethane, Barium, and others. The full list with the level and data source for each is above.
How many people does Bella Brook Water serve?
Bella Brook Water reports serving 50 people in New Hampshire, per its EPA record.
Has Bella Brook Water had any water quality violations?
The EPA has 98 violations on file for Bella Brook Water, of which 83 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.