Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2011-11-01 → 2011-11-30 |
| MCL | Health-based | Resolved | 2011-11-01 → 2011-11-30 |
| MCL | Health-based | Resolved | 2011-11-01 → 2011-11-30 |
| MCL | Health-based | Resolved | 2011-11-01 → 2011-11-30 |
| MR | Monitoring | Resolved | 2021-12-30 |
| MR | Monitoring | Resolved | 2021-12-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 837.495 µg/L 64% of the EPA limit 1300 µg/L
worst single sample: 1960 µg/L | 74/83 | SYR4 | 2014–2019 |
| Chloroform | 63 µg/L No EPA limit set
worst single sample: 77 µg/L | 42/49 | SYR4 | 2014–2019 |
| TTHM | 65.4 µg/L 82% of the EPA limit 80 µg/L
worst single sample: 79 µg/L | 40/41 | SYR4 | 2014–2019 |
| Total Haloacetic Acids (HAA5) | 42 µg/L 70% of the EPA limit 60 µg/L
worst single sample: 47 µg/L | 40/40 | SYR4 | 2014–2019 |
| Trichloroacetic Acid | 25.2 µg/L No EPA limit set
worst single sample: 27 µg/L | 39/40 | SYR4 | 2014–2019 |
| Bromodichloromethane | 2.44 µg/L No EPA limit set
worst single sample: 3.2 µg/L | 37/49 | SYR4 | 2014–2019 |
| Dichloroacetic Acid | 19 µg/L No EPA limit set | 37/40 | SYR4 | 2014–2019 |
| Lead | 11.36 µg/L 76% of the EPA limit 15 µg/L
worst single sample: 41.9 µg/L | 33/74 | SYR4 | 2015–2019 |
| Nitrate | 257.5 µg/L 2.6% of the EPA limit 10000 µg/L
worst single sample: 270 µg/L | 26/28 | SYR4 | 2014–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 20/20 | LCR | 2024 |
| Nitrate-Nitrite | 240 µg/L 2.4% of the EPA limit 10000 µg/L
worst single sample: 270 µg/L | 13/13 | SYR4 | 2014–2019 |
| Dibromochloromethane | 1.01 µg/L No EPA limit set
worst single sample: 1.1 µg/L | 10/49 | SYR4 | 2014–2019 |
| Barium | 12.4 µg/L 0.6% of the EPA limit 2000 µg/L
worst single sample: 12.6 µg/L | 6/9 | SYR4 | 2014–2019 |
| Chromium | 1.1 µg/L 1.1% of the EPA limit 100 µg/L | 1/9 | SYR4 | 2014–2019 |
| Combined Radium (-226 And -228) | 1.3 pCi/L 26% of the EPA limit 5 pCi/L | 1/6 | SYR4 | 2014–2019 |
91 contaminants tested, none detected
Utility contact
Frequently asked questions about Berlin Water Works
Is Berlin Water Works tap water safe to drink?
EPA monitoring detected 15 contaminants in Berlin Water Works's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Berlin Water Works's water?
EPA monitoring detected Copper, Chloroform, TTHM, Total Haloacetic Acids (HAA5), Trichloroacetic Acid, and others. The full list with the level and data source for each is above.
How many people does Berlin Water Works serve?
Berlin Water Works reports serving 9,575 people in New Hampshire, per its EPA record.
Has Berlin Water Works had any water quality violations?
The EPA has 6 violations on file for Berlin Water Works, of which 4 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.