Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2012-10-01 → 2012-12-31 |
| MCL | Health-based | Resolved | 2012-10-01 → 2012-12-31 |
| MCL | Health-based | Resolved | 2012-10-01 → 2012-12-31 |
| MCL | Health-based | Resolved | 2012-10-01 → 2012-12-31 |
| MCL | Health-based | Resolved | 2012-10-01 → 2012-12-31 |
| MCL | Health-based | Resolved | 2012-10-01 → 2012-12-31 |
| MCL | Health-based | Resolved | 2012-10-01 → 2012-12-31 |
| MCL | Health-based | Resolved | 2012-10-01 → 2012-12-31 |
| MCL | Health-based | Resolved | 2012-07-01 → 2012-09-30 |
| MCL | Health-based | Resolved | 2012-07-01 → 2012-09-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 181.95 µg/L 14% of the EPA limit 1300 µg/L
worst single sample: 221 µg/L | 12/12 | SYR4 | 2015–2019 |
| Arsenic | 6.055 µg/L 61% of the EPA limit 10 µg/L
worst single sample: 6.1 µg/L | 10/24 | SYR4 | 2014–2019 |
| Chloroform | 1.92 µg/L No EPA limit set
worst single sample: 2.4 µg/L | 7/12 | SYR4 | 2014–2019 |
| TTHM | 3.95 µg/L 4.9% of the EPA limit 80 µg/L
worst single sample: 4.7 µg/L | 7/8 | SYR4 | 2014–2019 |
| Bromodichloromethane | 1.175 µg/L No EPA limit set
worst single sample: 1.3 µg/L | 6/12 | SYR4 | 2014–2019 |
| Dibromochloromethane | 0.9600 µg/L No EPA limit set
worst single sample: 1 µg/L | 5/12 | SYR4 | 2014–2019 |
| Lead | 6.32 µg/L 42% of the EPA limit 15 µg/L
worst single sample: 7 µg/L | 5/10 | SYR4 | 2016–2019 |
| Barium | 20.78 µg/L 1% of the EPA limit 2000 µg/L
worst single sample: 21 µg/L | 2/2 | SYR4 | 2015–2018 |
| Combined Uranium | 2.5 µg/L 8.3% of the EPA limit 30 µg/L | 1/1 | SYR4 | 2019 |
| Fluoride | 250 µg/L 6.3% of the EPA limit 4000 µg/L | 1/2 | SYR4 | 2015–2018 |
| Mercury | 0.1000 µg/L 5% of the EPA limit 2 µg/L | 1/2 | SYR4 | 2015–2018 |
64 contaminants tested, none detected
Utility contact
Frequently asked questions about Swains Lake Village Water
Is Swains Lake Village Water tap water safe to drink?
EPA monitoring detected 11 contaminants in Swains Lake Village Water's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Swains Lake Village Water's water?
EPA monitoring detected Copper, Arsenic, Chloroform, TTHM, Bromodichloromethane, and others. The full list with the level and data source for each is above.
How many people does Swains Lake Village Water serve?
Swains Lake Village Water reports serving 227 people in New Hampshire, per its EPA record.
Has Swains Lake Village Water had any water quality violations?
The EPA has 353 violations on file for Swains Lake Village Water, of which 146 are health-based (a contaminant limit or required treatment was breached) and 2 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.