Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Archived | 1995-10-01 → 1995-10-31 |
| MCL | Health-based | Archived | 1995-10-01 → 1995-10-31 |
| MCL | Health-based | Archived | 1995-10-01 → 1995-10-31 |
| TT | Health-based | Resolved | 1992-01-01 → 1997-04-01 |
| MR | Monitoring | Resolved | 2021-10-01 |
| MR | Monitoring | Resolved | 2021-10-01 |
| Other | Monitoring | Unaddressed | 2015-02-10 |
| Other | Monitoring | Unaddressed | 2015-02-10 |
| MR | Monitoring | Resolved | 2014-07-01 → 2014-10-01 |
| MR | Monitoring | Resolved | 2014-07-01 → 2014-10-01 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 298.5 µg/L 23% of the EPA limit 1300 µg/L
worst single sample: 410 µg/L | 24/24 | SYR4 | 2014–2019 |
| Nitrate | 930 µg/L 9.3% of the EPA limit 10000 µg/L | 20/24 | SYR4 | 2014–2019 |
| Lead | 0.0310 mg/L 207% above the EPA limit of 0.0150 mg/L | 7/7 | LCR | 2012 |
| Bromodichloromethane | 2.1 µg/L No EPA limit set
worst single sample: 2.2 µg/L | 6/15 | SYR4 | 2014–2019 |
| Bromoform | 1.5 µg/L No EPA limit set
worst single sample: 1.6 µg/L | 6/15 | SYR4 | 2014–2019 |
| Dibromochloromethane | 2.225 µg/L No EPA limit set
worst single sample: 2.3 µg/L | 6/15 | SYR4 | 2014–2019 |
| TTHM | 6.375 µg/L 8% of the EPA limit 80 µg/L
worst single sample: 6.64 µg/L | 6/11 | SYR4 | 2014–2019 |
| Barium | 28.25 µg/L 1.4% of the EPA limit 2000 µg/L
worst single sample: 29 µg/L | 4/4 | SYR4 | 2014–2019 |
| Chloroform | 0.9300 µg/L No EPA limit set
worst single sample: 0.9400 µg/L | 3/15 | SYR4 | 2014–2019 |
| Combined Uranium | 0.2000 µg/L 0.7% of the EPA limit 30 µg/L | 3/3 | SYR4 | 2016–2019 |
| Gross Alpha, Excl. Radon And U | 9.34 pCi/L 62% of the EPA limit 15 pCi/L
worst single sample: 10.2 pCi/L | 3/3 | SYR4 | 2016–2019 |
| Combined Radium (-226 And -228) | 1.18 pCi/L 24% of the EPA limit 5 pCi/L
worst single sample: 1.2 pCi/L | 2/2 | SYR4 | 2016 |
| Dibromoacetic Acid | 1.1 µg/L No EPA limit set | 1/11 | SYR4 | 2014–2019 |
| Lead | 4.8 µg/L 32% of the EPA limit 15 µg/L | 1/20 | SYR4 | 2016–2019 |
| Total Haloacetic Acids (HAA5) | 1.1 µg/L 1.8% of the EPA limit 60 µg/L | 1/11 | SYR4 | 2014–2019 |
61 contaminants tested, none detected
Utility contact
Frequently asked questions about Ashland Water Dept
Is Ashland Water Dept tap water safe to drink?
EPA monitoring detected 15 contaminants in Ashland Water Dept's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Ashland Water Dept's water?
EPA monitoring detected Copper, Nitrate, Lead, Bromodichloromethane, Bromoform, and others. The full list with the level and data source for each is above.
How many people does Ashland Water Dept serve?
Ashland Water Dept reports serving 1,525 people in New Hampshire, per its EPA record.
Has Ashland Water Dept had any water quality violations?
The EPA has 181 violations on file for Ashland Water Dept, of which 4 are health-based (a contaminant limit or required treatment was breached) and 2 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.