← Nebraska

Tap water quality report

Wayne, City of

EPA monitoring tested this supplier for 106 contaminants and detected 19. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

106
contaminants tested
19
detected
5,990
people served
72
health-based violations
Water source
Ground water
Ownership
Local government
Counties served
Wayne

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

72
health-based violations
73
violations on file
0
still open
ViolationTypeStatusPeriod
MCL Health-based Resolved 2020-01-01 → 2020-03-31
MCL Health-based Resolved 2020-01-01 → 2020-03-31
MCL Health-based Resolved 2020-01-01 → 2020-03-31
MCL Health-based Resolved 2020-01-01 → 2020-03-31
MCL Health-based Resolved 2018-10-01 → 2018-12-31
MCL Health-based Resolved 2018-10-01 → 2018-12-31
MCL Health-based Resolved 2018-10-01 → 2018-12-31
MCL Health-based Resolved 2018-10-01 → 2018-12-31
MCL Health-based Resolved 2015-11-01 → 2015-11-30
MCL Health-based Resolved 2015-11-01 → 2015-11-30

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Nitrate-Nitrite
9621.5 µg/L 96%
of the EPA limit 10000 µg/L
worst single sample: 11700 µg/L
114/114 SYR4 2012–2019
Fluoride
1090 µg/L 27%
of the EPA limit 4000 µg/L
worst single sample: 1230 µg/L
104/104 SYR4 2012–2019
Copper
770.6 µg/L 59%
of the EPA limit 1300 µg/L
worst single sample: 2890 µg/L
60/60 SYR4 2012–2018
Combined Radium (-226 And -228)
4.02 pCi/L 80%
of the EPA limit 5 pCi/L
worst single sample: 6.7 pCi/L
39/45 SYR4 2012–2018
Selenium
64.96 µg/L 130%
of the EPA limit, at the 95th percentile of samples — 50 µg/L
worst single sample: 130 µg/L
37/37 SYR4 2012–2019
Lead
3.248 µg/L 22%
of the EPA limit 15 µg/L
worst single sample: 5.57 µg/L
33/60 SYR4 2012–2018
Combined Uranium
25.7621 µg/L 86%
of the EPA limit 30 µg/L
worst single sample: 28.31 µg/L
23/23 SYR4 2012–2016
Arsenic
4.504 µg/L 45%
of the EPA limit 10 µg/L
worst single sample: 4.53 µg/L
14/14 SYR4 2013–2019
Lead
0.0023 mg/L 15%
of the EPA limit 0.0150 mg/L
10/10 LCR 2024
Barium
73.71 µg/L 3.7%
of the EPA limit 2000 µg/L
worst single sample: 74.2 µg/L
8/8 SYR4 2012–2019
Chromium
9.041 µg/L 9%
of the EPA limit 100 µg/L
worst single sample: 9.16 µg/L
8/8 SYR4 2012–2019
Lithium
30 µg/L
No EPA limit set
6/6 UCMR-5 2024
Dibromochloromethane
1.03 µg/L
No EPA limit set
worst single sample: 1.05 µg/L
3/13 SYR4 2012–2019
TTHM
12.784 µg/L 16%
of the EPA limit 80 µg/L
worst single sample: 13.8 µg/L
3/13 SYR4 2012–2019
Bromodichloromethane
1.0654 µg/L
No EPA limit set
worst single sample: 1.07 µg/L
2/13 SYR4 2012–2019
Bromoform
0.7045 µg/L
No EPA limit set
worst single sample: 0.7100 µg/L
2/13 SYR4 2012–2019
Chloroform
11.731 µg/L
No EPA limit set
worst single sample: 12.3 µg/L
2/13 SYR4 2012–2019
Dibromoacetic Acid
0.5600 µg/L
No EPA limit set
1/2 SYR4 2013–2019
Total Haloacetic Acids (HAA5)
0.5600 µg/L 0.9%
of the EPA limit 60 µg/L
1/2 SYR4 2013–2019
87 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS2,4,5-TP2,4-D4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaAntimony, TotalAtrazineBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalChlorobenzeneCyanideCadmiumCarbofuranCarbon TetrachlorideChlordaneDichloromethaneDalaponDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDichloroacetic AcidDinosebDiquatEthylene DibromideEndrinEthylbenzeneGlyphosateGross Alpha, Excl. Radon And UHexachlorobenzeneHfpo-DaHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorMonobromoacetic AcidMonochloroacetic AcidNetfosaaNfdhaNmefosaaOxamylPfbaPFBSPfdaPfdoaPfeesaPfhpaPfhpsPfhxaPFHXSPfmbaPfmpaPFNAPFOAPFOSPfpeaPfpesPftaPftrdaPfunaPentachlorophenolPicloramSimazineStyreneTetrachloroethyleneThallium, TotalTolueneToxapheneTrichloroacetic AcidTrichloroethyleneVinyl Chloridecis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
BLECKE, WES
Phone
402-375-1733
Email
[email protected]

Frequently asked questions about Wayne, City of

Is Wayne, City of tap water safe to drink?

EPA monitoring detected 19 contaminants in Wayne, City of's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Wayne, City of's water?

EPA monitoring detected Nitrate-Nitrite, Fluoride, Copper, Combined Radium (-226 And -228), Selenium, and others. The full list with the level and data source for each is above.

How many people does Wayne, City of serve?

Wayne, City of reports serving 5,990 people in Nebraska, per its EPA record.

Has Wayne, City of had any water quality violations?

The EPA has 73 violations on file for Wayne, City of, of which 72 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.