Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2013-09-01 → 2013-09-30 |
| MCL | Health-based | Resolved | 2013-09-01 → 2013-09-30 |
| MCL | Health-based | Resolved | 2013-09-01 → 2013-09-30 |
| MCL | Health-based | Resolved | 2013-09-01 → 2013-09-30 |
| MCL | Health-based | Resolved | 2011-11-01 → 2011-11-30 |
| MCL | Health-based | Resolved | 2011-11-01 → 2011-11-30 |
| MCL | Health-based | Resolved | 2011-11-01 → 2011-11-30 |
| MCL | Health-based | Resolved | 2011-11-01 → 2011-11-30 |
| MCL | Health-based | Resolved | 2010-09-01 → 2010-09-30 |
| MCL | Health-based | Resolved | 2010-09-01 → 2010-09-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate-Nitrite | 4750 µg/L 48% of the EPA limit 10000 µg/L
worst single sample: 6400 µg/L | 54/54 | SYR4 | 2012–2019 |
| Copper | 285.4 µg/L 22% of the EPA limit 1300 µg/L
worst single sample: 677 µg/L | 29/30 | SYR4 | 2013–2019 |
| Lead | 17.3675 µg/L 116% of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 28.9 µg/L | 26/30 | SYR4 | 2013–2019 |
| Arsenic | 8.774 µg/L 88% of the EPA limit 10 µg/L
worst single sample: 8.95 µg/L | 9/9 | SYR4 | 2013–2019 |
| Lead | 0.0032 mg/L 21% of the EPA limit 0.0150 mg/L | 9/9 | LCR | 2025 |
| Barium | 114.96 µg/L 5.7% of the EPA limit 2000 µg/L
worst single sample: 117 µg/L | 3/3 | SYR4 | 2015–2017 |
| Combined Radium (-226 And -228) | 1.68 pCi/L 34% of the EPA limit 5 pCi/L
worst single sample: 1.7 pCi/L | 3/6 | SYR4 | 2012–2018 |
| Combined Uranium | 33.1227 µg/L 110% of the EPA limit, at the 95th percentile of samples — 30 µg/L
worst single sample: 33.525 µg/L | 3/3 | SYR4 | 2016 |
| Fluoride | 430.4 µg/L 11% of the EPA limit 4000 µg/L
worst single sample: 432 µg/L | 3/3 | SYR4 | 2015–2017 |
| Benzo(A)Pyrene | 0.0620 µg/L 31% of the EPA limit 0.2000 µg/L | 1/17 | SYR4 | 2012–2019 |
| Selenium | 5.79 µg/L 12% of the EPA limit 50 µg/L | 1/3 | SYR4 | 2015–2017 |
58 contaminants tested, none detected
Utility contact
Frequently asked questions about Mitchell, City of
Is Mitchell, City of tap water safe to drink?
EPA monitoring detected 11 contaminants in Mitchell, City of's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Mitchell, City of's water?
EPA monitoring detected Nitrate-Nitrite, Copper, Lead, Arsenic, Lead, and others. The full list with the level and data source for each is above.
How many people does Mitchell, City of serve?
Mitchell, City of reports serving 1,526 people in Nebraska, per its EPA record.
Has Mitchell, City of had any water quality violations?
The EPA has 32 violations on file for Mitchell, City of, of which 27 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.