Compliance record
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Fluoride | 1022 µg/L 26% of the EPA limit 4000 µg/L
worst single sample: 1650 µg/L | 97/97 | SYR4 | 2012–2019 |
| Copper | 202.1 µg/L 16% of the EPA limit 1300 µg/L
worst single sample: 277 µg/L | 58/60 | SYR4 | 2013–2019 |
| Lead | 15.22 µg/L 101% of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 99.1 µg/L | 45/60 | SYR4 | 2013–2019 |
| Arsenic | 10.69 µg/L 107% of the EPA limit, at the 95th percentile of samples — 10 µg/L
worst single sample: 11.1 µg/L | 32/32 | SYR4 | 2012–2019 |
| Nitrate-Nitrite | 616 µg/L 6.2% of the EPA limit 10000 µg/L | 16/16 | SYR4 | 2012–2019 |
| Bromodichloromethane | 17.865 µg/L No EPA limit set
worst single sample: 19.1 µg/L | 14/14 | SYR4 | 2014–2019 |
| Chloroform | 22.87 µg/L No EPA limit set
worst single sample: 23 µg/L | 14/14 | SYR4 | 2014–2019 |
| Dibromochloromethane | 13.14 µg/L No EPA limit set
worst single sample: 13.4 µg/L | 14/14 | SYR4 | 2014–2019 |
| TTHM | 54.405 µg/L 68% of the EPA limit 80 µg/L
worst single sample: 54.6 µg/L | 14/14 | SYR4 | 2014–2019 |
| Bromoform | 2.123 µg/L No EPA limit set
worst single sample: 2.2 µg/L | 12/14 | SYR4 | 2014–2019 |
| Dichloroacetic Acid | 2.8415 µg/L No EPA limit set
worst single sample: 3.1 µg/L | 12/12 | SYR4 | 2014–2019 |
| Total Haloacetic Acids (HAA5) | 7.086 µg/L 12% of the EPA limit 60 µg/L
worst single sample: 7.13 µg/L | 12/12 | SYR4 | 2014–2019 |
| Trichloroacetic Acid | 4.786 µg/L No EPA limit set
worst single sample: 4.94 µg/L | 12/12 | SYR4 | 2014–2019 |
| Lead | 0.0015 mg/L 10% of the EPA limit 0.0150 mg/L | 10/10 | LCR | 2025 |
| Dibromoacetic Acid | 0.6196 µg/L No EPA limit set
worst single sample: 0.6290 µg/L | 3/12 | SYR4 | 2014–2019 |
| Lithium | 38 µg/L No EPA limit set | 2/2 | UCMR-5 | 2024 |
| Barium | 31.3 µg/L 1.6% of the EPA limit 2000 µg/L | 1/1 | SYR4 | 2014 |
| Chromium | 3.2 µg/L 3.2% of the EPA limit 100 µg/L | 1/1 | SYR4 | 2014 |
| Combined Radium (-226 And -228) | 0.1000 pCi/L 2% of the EPA limit 5 pCi/L | 1/2 | SYR4 | 2012–2018 |
84 contaminants tested, none detected
Utility contact
Frequently asked questions about Falls City, City of
Is Falls City, City of tap water safe to drink?
EPA monitoring detected 19 contaminants in Falls City, City of's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Falls City, City of's water?
EPA monitoring detected Fluoride, Copper, Lead, Arsenic, Nitrate-Nitrite, and others. The full list with the level and data source for each is above.
How many people does Falls City, City of serve?
Falls City, City of reports serving 4,015 people in Nebraska, per its EPA record.
Has Falls City, City of had any water quality violations?
The EPA has no formal drinking-water violations on file for Falls City, City of.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.