← Nebraska

Tap water quality report

Beaver City, City of

EPA monitoring tested this supplier for 100 contaminants and detected 12. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

100
contaminants tested
12
detected
537
people served
8
health-based violations
Water source
Ground water
Ownership
Local government
Counties served
Furnas

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

8
health-based violations
12
violations on file
0
still open
ViolationTypeStatusPeriod
MCL Health-based Resolved 2009-10-01 → 2009-12-31
MCL Health-based Resolved 2009-10-01 → 2009-12-31
MCL Health-based Resolved 2009-10-01 → 2009-12-31
MCL Health-based Resolved 2009-10-01 → 2009-12-31
MCL Health-based Resolved 2000-03-01 → 2000-03-31
MCL Health-based Resolved 2000-03-01 → 2000-03-31
MCL Health-based Resolved 2000-03-01 → 2000-03-31
MCL Health-based Resolved 2000-03-01 → 2000-03-31
MR Monitoring Resolved 2010-05-01 → 2010-05-31
MR Monitoring Resolved 2010-05-01 → 2010-05-31

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Arsenic
9.132 µg/L 91%
of the EPA limit 10 µg/L
worst single sample: 13.4 µg/L
32/32 SYR4 2012–2019
Copper
417.85 µg/L 32%
of the EPA limit 1300 µg/L
worst single sample: 518 µg/L
30/30 SYR4 2012–2018
Nitrate-Nitrite
6200 µg/L 62%
of the EPA limit 10000 µg/L
worst single sample: 6550 µg/L
28/28 SYR4 2012–2019
Lead
5.59 µg/L 37%
of the EPA limit 15 µg/L
worst single sample: 11 µg/L
21/30 SYR4 2012–2018
Combined Uranium
17.8055 µg/L 59%
of the EPA limit 30 µg/L
worst single sample: 17.88 µg/L
11/11 SYR4 2014–2019
Lead
0.0144 mg/L 96%
of the EPA limit 0.0150 mg/L
9/9 LCR 2024
Gross Alpha, Excl. Radon And U
1.996 pCi/L 13%
of the EPA limit 15 pCi/L
worst single sample: 2.08 pCi/L
5/11 SYR4 2014–2019
Combined Radium (-226 And -228)
1.9765 pCi/L 40%
of the EPA limit 5 pCi/L
worst single sample: 2.07 pCi/L
2/2 SYR4 2012–2018
Lithium
23.7 µg/L
No EPA limit set
2/2 UCMR-5 2024
Antimony, Total
2.15 µg/L 36%
of the EPA limit 6 µg/L
1/1 SYR4 2016
Barium
293 µg/L 15%
of the EPA limit 2000 µg/L
1/1 SYR4 2016
Fluoride
369 µg/L 9.2%
of the EPA limit 4000 µg/L
1/1 SYR4 2016
88 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS2,4,5-TP2,4-D4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaAtrazineBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalBromodichloromethaneBromoformChlorobenzeneCyanideCadmiumCarbofuranCarbon TetrachlorideChlordaneChloroformChromiumDichloromethaneDalaponDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDibromochloromethaneDinosebDiquatEthylene DibromideEndrinEthylbenzeneGlyphosateHexachlorobenzeneHfpo-DaHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorNetfosaaNfdhaNmefosaaOxamylPfbaPFBSPfdaPfdoaPfeesaPfhpaPfhpsPfhxaPFHXSPfmbaPfmpaPFNAPFOAPFOSPfpeaPfpesPftaPftrdaPfunaPentachlorophenolPicloramSeleniumSimazineStyreneTTHMTetrachloroethyleneThallium, TotalTolueneToxapheneTrichloroethyleneVinyl Chloridecis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
MAYBERRY, JACKIE
Phone
308-268-2145
Email
[email protected]

Frequently asked questions about Beaver City, City of

Is Beaver City, City of tap water safe to drink?

EPA monitoring detected 12 contaminants in Beaver City, City of's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Beaver City, City of's water?

EPA monitoring detected Arsenic, Copper, Nitrate-Nitrite, Lead, Combined Uranium, and others. The full list with the level and data source for each is above.

How many people does Beaver City, City of serve?

Beaver City, City of reports serving 537 people in Nebraska, per its EPA record.

Has Beaver City, City of had any water quality violations?

The EPA has 12 violations on file for Beaver City, City of, of which 8 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.