Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2010-07-01 → 2010-07-31 |
| MCL | Health-based | Resolved | 2010-07-01 → 2010-07-31 |
| MCL | Health-based | Resolved | 2010-07-01 → 2010-07-31 |
| MCL | Health-based | Archived | 1999-09-01 → 1999-09-30 |
| MCL | Health-based | Archived | 1999-09-01 → 1999-09-30 |
| MCL | Health-based | Archived | 1999-09-01 → 1999-09-30 |
| MCL | Health-based | Resolved | 1987-10-01 → 1990-09-30 |
| MCL | Health-based | Resolved | 1987-10-01 → 1990-09-30 |
| MCL | Health-based | Resolved | 1987-10-01 → 1990-09-30 |
| MR | Monitoring | Archived | 2025-10-01 → 2025-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Lead | 0.0030 mg/L 20% of the EPA limit 0.0150 mg/L | 16/16 | LCR | 2025 |
| Copper | 955 µg/L 73% of the EPA limit 1300 µg/L
worst single sample: 1220 µg/L | 11/15 | SYR4 | 2013–2019 |
| Bromodichloromethane | 22.292 µg/L No EPA limit set
worst single sample: 23.18 µg/L | 9/9 | SYR4 | 2014–2019 |
| Dibromochloromethane | 28.012 µg/L No EPA limit set
worst single sample: 31.04 µg/L | 9/9 | SYR4 | 2014–2019 |
| TTHM | 81.498 µg/L 102% of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 83.93 µg/L | 9/9 | SYR4 | 2014–2019 |
| Bromoform | 17.936 µg/L No EPA limit set
worst single sample: 21.1 µg/L | 8/9 | SYR4 | 2014–2019 |
| Chloroform | 19.787 µg/L No EPA limit set
worst single sample: 21.74 µg/L | 7/9 | SYR4 | 2014–2019 |
| Dichloroacetic Acid | 5.021 µg/L No EPA limit set
worst single sample: 5.39 µg/L | 7/9 | SYR4 | 2014–2019 |
| Total Haloacetic Acids (HAA5) | 13.146 µg/L 22% of the EPA limit 60 µg/L
worst single sample: 14.34 µg/L | 7/9 | SYR4 | 2014–2019 |
| Dibromoacetic Acid | 8.445 µg/L No EPA limit set
worst single sample: 9.13 µg/L | 6/9 | SYR4 | 2014–2019 |
| Lead | 3.7195 µg/L 25% of the EPA limit 15 µg/L
worst single sample: 3.88 µg/L | 4/15 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 2.56 µg/L No EPA limit set | 1/9 | SYR4 | 2014–2019 |
2 contaminants tested, none detected
Utility contact
Frequently asked questions about Cleveland City of
Is Cleveland City of tap water safe to drink?
EPA monitoring detected 12 contaminants in Cleveland City of's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Cleveland City of's water?
EPA monitoring detected Lead, Copper, Bromodichloromethane, Dibromochloromethane, TTHM, and others. The full list with the level and data source for each is above.
How many people does Cleveland City of serve?
Cleveland City of reports serving 83 people in North Dakota, per its EPA record.
Has Cleveland City of had any water quality violations?
The EPA has 33 violations on file for Cleveland City of, of which 9 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.