Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2006-06-01 → 2006-06-30 |
| MCL | Health-based | Resolved | 2006-06-01 → 2006-06-30 |
| MCL | Health-based | Resolved | 2006-06-01 → 2006-06-30 |
| MCL | Health-based | Resolved | 2006-06-01 → 2006-06-30 |
| TT | Health-based | Resolved | 2003-01-01 |
| TT | Health-based | Resolved | 2003-01-01 |
| TT | Health-based | Resolved | 2003-01-01 |
| TT | Health-based | Resolved | 2003-01-01 |
| TT | Health-based | Resolved | 2003-01-01 |
| TT | Health-based | Resolved | 2003-01-01 |
PFAS detected
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Total Haloacetic Acids (HAA5) | 66.13 µg/L 110% of the EPA limit, at the 95th percentile of samples — 60 µg/L
worst single sample: 71 µg/L | 63/63 | SYR4 | 2012–2019 |
| TTHM | 85.045 µg/L 106% of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 116 µg/L | 62/63 | SYR4 | 2012–2019 |
| Bromodichloromethane | 16.51 µg/L No EPA limit set
worst single sample: 21 µg/L | 55/55 | SYR4 | 2013–2019 |
| Chloroform | 73.36 µg/L No EPA limit set
worst single sample: 92 µg/L | 55/55 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 24.31 µg/L No EPA limit set
worst single sample: 25.8 µg/L | 55/55 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 39.19 µg/L No EPA limit set
worst single sample: 45.3 µg/L | 54/55 | SYR4 | 2013–2019 |
| Dibromochloromethane | 5 µg/L No EPA limit set
worst single sample: 7.4 µg/L | 51/55 | SYR4 | 2013–2019 |
| Monochloroacetic Acid | 3.93 µg/L No EPA limit set
worst single sample: 4 µg/L | 15/55 | SYR4 | 2013–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 12/12 | LCR | 2025 |
| Dibromoacetic Acid | 2.46 µg/L No EPA limit set
worst single sample: 2.5 µg/L | 9/55 | SYR4 | 2013–2019 |
| Copper | 331.4 µg/L 25% of the EPA limit 1300 µg/L
worst single sample: 337 µg/L | 5/40 | SYR4 | 2014–2017 |
| Monobromoacetic Acid | 7.2 µg/L No EPA limit set | 1/55 | SYR4 | 2013–2019 |
29 contaminants tested, none detected
Utility contact
Frequently asked questions about Central Nash Water & Sewer
Is Central Nash Water & Sewer tap water safe to drink?
EPA monitoring detected 15 contaminants in Central Nash Water & Sewer's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Central Nash Water & Sewer's water?
EPA monitoring detected Total Haloacetic Acids (HAA5), TTHM, Bromodichloromethane, Chloroform, Trichloroacetic Acid, and others. The full list with the level and data source for each is above.
How many people does Central Nash Water & Sewer serve?
Central Nash Water & Sewer reports serving 7,675 people in North Carolina, per its EPA record.
Has Central Nash Water & Sewer had any water quality violations?
The EPA has 71 violations on file for Central Nash Water & Sewer, of which 12 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.