Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MR | Monitoring | Resolved | 2024-01-01 |
| MR | Monitoring | Resolved | 2024-01-01 |
| MR | Monitoring | Resolved | 2024-01-01 |
| MON | Monitoring | Resolved | 2022-12-01 → 2022-12-31 |
| MON | Monitoring | Resolved | 2022-12-01 → 2022-12-31 |
| MON | Monitoring | Resolved | 2022-12-01 → 2022-12-31 |
| MON | Monitoring | Resolved | 2022-12-01 → 2022-12-31 |
| MON | Monitoring | Resolved | 2022-12-01 → 2022-12-31 |
| MON | Monitoring | Resolved | 2022-12-01 → 2022-12-31 |
| MR | Monitoring | Resolved | 2022-10-01 → 2022-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| TTHM | 67 µg/L 84% of the EPA limit 80 µg/L
worst single sample: 70 µg/L | 7/7 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 48.4 µg/L 81% of the EPA limit 60 µg/L
worst single sample: 52 µg/L | 7/7 | SYR4 | 2013–2019 |
| Bromodichloromethane | 12.705 µg/L No EPA limit set
worst single sample: 13 µg/L | 6/6 | SYR4 | 2014–2019 |
| Chloroform | 53.825 µg/L No EPA limit set
worst single sample: 56 µg/L | 6/6 | SYR4 | 2014–2019 |
| Dibromochloromethane | 2.78675 µg/L No EPA limit set
worst single sample: 3.049 µg/L | 6/6 | SYR4 | 2014–2019 |
| Dichloroacetic Acid | 21.25 µg/L No EPA limit set
worst single sample: 22 µg/L | 6/6 | SYR4 | 2014–2019 |
| Trichloroacetic Acid | 18 µg/L No EPA limit set | 6/6 | SYR4 | 2014–2019 |
| Dibromoacetic Acid | 1 µg/L No EPA limit set | 1/6 | SYR4 | 2014–2019 |
| Lead | 0.0135 mg/L 90% of the EPA limit 0.0150 mg/L | 1/1 | LCR | 2025 |
| Lead | 3 µg/L 20% of the EPA limit 15 µg/L | 1/10 | SYR4 | 2014–2017 |
| Monobromoacetic Acid | 11 µg/L No EPA limit set | 1/6 | SYR4 | 2014–2019 |
| Monochloroacetic Acid | 3 µg/L No EPA limit set | 1/6 | SYR4 | 2014–2019 |
67 contaminants tested, none detected
Utility contact
Frequently asked questions about Shady Haven Mhp
Is Shady Haven Mhp tap water safe to drink?
EPA monitoring detected 12 contaminants in Shady Haven Mhp's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Shady Haven Mhp's water?
EPA monitoring detected TTHM, Total Haloacetic Acids (HAA5), Bromodichloromethane, Chloroform, Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does Shady Haven Mhp serve?
Shady Haven Mhp reports serving 46 people in North Carolina, per its EPA record.
Has Shady Haven Mhp had any water quality violations?
The EPA has 64 violations on file for Shady Haven Mhp, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.