Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MR | Monitoring | Resolved | 2006-10-01 |
| MR | Monitoring | Resolved | 2006-10-01 |
| MR | Monitoring | Resolved | 2006-10-01 |
| MR | Monitoring | Resolved | 2006-10-01 |
| Other | Monitoring | Resolved | 2001-07-01 |
| Other | Monitoring | Resolved | 2001-07-01 |
| Other | Monitoring | Resolved | 2001-07-01 |
| MR | Monitoring | Resolved | 2000-10-01 → 2001-09-30 |
| MR | Monitoring | Archived | 1980-10-01 → 1981-09-30 |
| MR | Monitoring | Archived | 1980-10-01 → 1981-09-30 |
PFAS detected
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| TTHM | 51.4 µg/L 64% of the EPA limit 80 µg/L
worst single sample: 72 µg/L | 79/80 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 34.74 µg/L 58% of the EPA limit 60 µg/L
worst single sample: 47 µg/L | 75/84 | SYR4 | 2012–2019 |
| Chloroform | 29.245 µg/L No EPA limit set
worst single sample: 40 µg/L | 60/60 | SYR4 | 2013–2019 |
| Bromodichloromethane | 11.15 µg/L No EPA limit set
worst single sample: 14 µg/L | 56/60 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 23.42 µg/L No EPA limit set
worst single sample: 26.6 µg/L | 53/60 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 8.12 µg/L No EPA limit set
worst single sample: 13 µg/L | 49/60 | SYR4 | 2013–2019 |
| Copper | 277.75 µg/L 21% of the EPA limit 1300 µg/L
worst single sample: 307 µg/L | 36/60 | SYR4 | 2014–2017 |
| Dibromochloromethane | 4.05 µg/L No EPA limit set
worst single sample: 4.6 µg/L | 36/60 | SYR4 | 2013–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 16/16 | LCR | 2025 |
| Monochloroacetic Acid | 2.88 µg/L No EPA limit set
worst single sample: 3 µg/L | 13/60 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 1.65 µg/L No EPA limit set
worst single sample: 1.7 µg/L | 11/60 | SYR4 | 2013–2019 |
| Lead | 15.4 µg/L 103% of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 16 µg/L | 5/60 | SYR4 | 2014–2017 |
25 contaminants tested, none detected
Utility contact
Frequently asked questions about Deep Run Water Corporation
Is Deep Run Water Corporation tap water safe to drink?
EPA monitoring detected 19 contaminants in Deep Run Water Corporation's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Deep Run Water Corporation's water?
EPA monitoring detected TTHM, Total Haloacetic Acids (HAA5), Chloroform, Bromodichloromethane, Dichloroacetic Acid, and others. The full list with the level and data source for each is above.
How many people does Deep Run Water Corporation serve?
Deep Run Water Corporation reports serving 14,196 people in North Carolina, per its EPA record.
Has Deep Run Water Corporation had any water quality violations?
The EPA has 13 violations on file for Deep Run Water Corporation, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.