Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| Other | Monitoring | Resolved | 2020-07-01 |
| Other | Monitoring | Resolved | 2020-07-01 |
| Other | Monitoring | Resolved | 2020-07-01 |
| Other | Monitoring | Resolved | 2009-04-19 |
| Other | Monitoring | Resolved | 2009-04-19 |
| Other | Monitoring | Resolved | 2008-05-23 |
| Other | Monitoring | Resolved | 2008-05-23 |
| MR | Monitoring | Resolved | 2007-10-01 → 2007-12-31 |
| MR | Monitoring | Resolved | 2007-10-01 → 2007-12-31 |
| MR | Monitoring | Resolved | 2007-10-01 → 2007-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| TTHM | 12.76 µg/L 16% of the EPA limit 80 µg/L
worst single sample: 15 µg/L | 17/18 | SYR4 | 2012–2019 |
| Bromodichloromethane | 4.19 µg/L No EPA limit set
worst single sample: 4.3 µg/L | 12/12 | SYR4 | 2014–2019 |
| Chloroform | 5.135 µg/L No EPA limit set
worst single sample: 5.3 µg/L | 12/12 | SYR4 | 2014–2019 |
| Dibromochloromethane | 3.17 µg/L No EPA limit set
worst single sample: 3.5 µg/L | 12/12 | SYR4 | 2014–2019 |
| Copper | 1335 µg/L 103% of the EPA limit, at the 95th percentile of samples — 1300 µg/L
worst single sample: 2175 µg/L | 11/20 | SYR4 | 2014–2017 |
| Dichloroacetic Acid | 2.075 µg/L No EPA limit set
worst single sample: 2.3 µg/L | 6/12 | SYR4 | 2014–2019 |
| Fluoride | 330 µg/L 8.3% of the EPA limit 4000 µg/L
worst single sample: 390 µg/L | 6/10 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 2.075 µg/L 3.5% of the EPA limit 60 µg/L
worst single sample: 2.3 µg/L | 6/18 | SYR4 | 2012–2019 |
| Lead | 0.0070 mg/L 47% of the EPA limit 0.0150 mg/L | 4/4 | LCR | 2025 |
| Xylenes, Total | 1.93 µg/L 0% of the EPA limit 10000 µg/L
worst single sample: 2 µg/L | 2/21 | SYR4 | 2012–2019 |
| Lead | 10 µg/L 67% of the EPA limit 15 µg/L | 1/20 | SYR4 | 2014–2017 |
| Styrene | 1 µg/L 1% of the EPA limit 100 µg/L | 1/21 | SYR4 | 2012–2019 |
64 contaminants tested, none detected
Utility contact
Frequently asked questions about Warsaw, Town of
Is Warsaw, Town of tap water safe to drink?
EPA monitoring detected 12 contaminants in Warsaw, Town of's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Warsaw, Town of's water?
EPA monitoring detected TTHM, Bromodichloromethane, Chloroform, Dibromochloromethane, Copper, and others. The full list with the level and data source for each is above.
How many people does Warsaw, Town of serve?
Warsaw, Town of reports serving 3,108 people in North Carolina, per its EPA record.
Has Warsaw, Town of had any water quality violations?
The EPA has 22 violations on file for Warsaw, Town of, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.