Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2020-04-01 → 2020-06-30 |
| MCL | Health-based | Resolved | 2020-04-01 → 2020-06-30 |
| MCL | Health-based | Resolved | 2020-04-01 → 2020-06-30 |
| MCL | Health-based | Resolved | 2020-01-01 → 2020-03-31 |
| MCL | Health-based | Resolved | 2020-01-01 → 2020-03-31 |
| MCL | Health-based | Resolved | 2020-01-01 → 2020-03-31 |
| MCL | Health-based | Resolved | 2019-10-01 → 2019-12-31 |
| MCL | Health-based | Resolved | 2019-10-01 → 2019-12-31 |
| MCL | Health-based | Resolved | 2019-10-01 → 2019-12-31 |
| MCL | Health-based | Resolved | 2019-10-01 → 2019-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate | 7042.5 µg/L 70% of the EPA limit 10000 µg/L
worst single sample: 7340 µg/L | 64/64 | SYR4 | 2012–2019 |
| Copper | 468.4 µg/L 36% of the EPA limit 1300 µg/L
worst single sample: 614 µg/L | 15/15 | SYR4 | 2012–2018 |
| Lead | 5.5 µg/L 37% of the EPA limit 15 µg/L
worst single sample: 6 µg/L | 11/15 | SYR4 | 2012–2018 |
| Nitrate-Nitrite | 5960 µg/L 60% of the EPA limit 10000 µg/L
worst single sample: 6100 µg/L | 8/8 | SYR4 | 2012–2014 |
| 1,2-Dichloropropane | 2.58 µg/L 52% of the EPA limit 5 µg/L
worst single sample: 2.7 µg/L | 4/10 | SYR4 | 2012–2019 |
| Xylenes, Total | 68.97 µg/L 0.7% of the EPA limit 10000 µg/L
worst single sample: 75 µg/L | 4/10 | SYR4 | 2012–2019 |
| Lead | 0.0061 mg/L 41% of the EPA limit 0.0150 mg/L | 3/3 | LCR | 2025 |
| Combined Radium (-226 And -228) | 3.785 pCi/L 76% of the EPA limit 5 pCi/L
worst single sample: 3.9 pCi/L | 2/3 | SYR4 | 2013–2019 |
| Ethylbenzene | 15.36 µg/L 2.2% of the EPA limit 700 µg/L
worst single sample: 15.8 µg/L | 2/10 | SYR4 | 2012–2019 |
| Barium | 47 µg/L 2.4% of the EPA limit 2000 µg/L | 1/3 | SYR4 | 2012–2019 |
| Combined Uranium | 1.0579 µg/L 3.5% of the EPA limit 30 µg/L | 1/2 | SYR4 | 2013–2016 |
| Ethylene Dibromide | 0.5700 µg/L 1140% of the EPA limit, at the 95th percentile of samples — 0.0500 µg/L | 1/5 | SYR4 | 2012–2019 |
| Fluoride | 120 µg/L 3% of the EPA limit 4000 µg/L | 1/3 | SYR4 | 2012–2019 |
64 contaminants tested, none detected
Utility contact
Frequently asked questions about Shady Acres Mh Village
Is Shady Acres Mh Village tap water safe to drink?
EPA monitoring detected 13 contaminants in Shady Acres Mh Village's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Shady Acres Mh Village's water?
EPA monitoring detected Nitrate, Copper, Lead, Nitrate-Nitrite, 1,2-Dichloropropane, and others. The full list with the level and data source for each is above.
How many people does Shady Acres Mh Village serve?
Shady Acres Mh Village reports serving 115 people in North Carolina, per its EPA record.
Has Shady Acres Mh Village had any water quality violations?
The EPA has 563 violations on file for Shady Acres Mh Village, of which 132 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.