Tap WaterIndex

← North Carolina

Tap water quality report

Red Springs, Town of

EPA monitoring tested this supplier for 110 contaminants and detected 11. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

110
contaminants tested
11
detected
4,423
people served
2
health-based violations
North Carolina rankingsLead in North CarolinaPFAS in North Carolina
Water source
Ground water
Ownership
Local government
Counties served
Robeson

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

2
health-based violations
96
violations on file
0
still open
ViolationTypeStatusPeriod
TT Health-based Resolved 2024-10-17
TT Health-based Resolved 2024-10-17
RPT Monitoring Resolved 2024-10-17
RPT Monitoring Resolved 2024-10-17
MR Monitoring Resolved 2024-04-01 → 2024-06-30
MR Monitoring Resolved 2024-04-01 → 2024-06-30
MR Monitoring Resolved 2024-04-01 → 2024-06-30
MR Monitoring Resolved 2024-04-01 → 2024-06-30
MR Monitoring Resolved 2024-04-01 → 2024-06-30
MR Monitoring Resolved 2024-04-01 → 2024-06-30

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Lead
0.0 mg/L 0%
of the EPA limit 0.0150 mg/L
 14/14 LCR 2025
TTHM
21.625 µg/L 27%
of the EPA limit 80 µg/L
worst single sample: 21.8 µg/L
8/8 SYR4 2012–2019
Lead
36.2 µg/L 241%
of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 40 µg/L
5/80 SYR4 2012–2017
Fluoride
1288 µg/L 32%
of the EPA limit 4000 µg/L
worst single sample: 1310 µg/L
3/3 SYR4 2012–2018
Copper
122.7 µg/L 9.4%
of the EPA limit 1300 µg/L
worst single sample: 124 µg/L
2/80 SYR4 2012–2017
Nitrate
4690 µg/L 47%
of the EPA limit 10000 µg/L
 2/14 SYR4 2012–2019
Bromodichloromethane
3.21 µg/L
No EPA limit set
 1/1 SYR4 2019
Chloroform
1.99 µg/L
No EPA limit set
 1/1 SYR4 2019
Combined Radium (-226 And -228)
0.5000 pCi/L 10%
of the EPA limit 5 pCi/L
 1/2 SYR4 2012–2014
Dibromochloromethane
3.13 µg/L
No EPA limit set
 1/1 SYR4 2019
Total Haloacetic Acids (HAA5)
1.67 µg/L 2.8%
of the EPA limit 60 µg/L
 1/8 SYR4 2012–2019
99 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS2,4,5-TP2,4-D4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaAntimony, TotalArsenicAsbestosAtrazineBhc-GammaBariumBenzeneBenzo(A)PyreneBeryllium, TotalBromoformChlorobenzeneCyanideCadmiumCarbofuranCarbon TetrachlorideChlordaneChromiumCombined UraniumDichloromethaneDalaponDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDibromoacetic AcidDichloroacetic AcidDinosebEthylene DibromideEndrinEthylbenzeneGross Alpha, Excl. Radon And UGross Beta Particle ActivityHexachlorobenzeneHfpo-DaHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorMonobromoacetic AcidMonochloroacetic AcidNetfosaaNfdhaNmefosaaNitrate-NitriteNitriteOxamylPfbaPFBSPfdaPfdoaPfeesaPfhpaPfhpsPfhxaPFHXSPfmbaPfmpaPFNAPFOAPFOSPfpeaPfpesPftaPftrdaPfunaPentachlorophenolPicloramSeleniumSimazineStyreneTetrachloroethyleneThallium, TotalTolueneTotal Polychlorinated Biphenyls (PCB)ToxapheneTrichloroacetic AcidTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneLithiumO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
MAULDIN, TIMOTHY
Phone
910-843-5241
Email
[email protected]

Frequently asked questions about Red Springs, Town of

Is Red Springs, Town of tap water safe to drink?

EPA monitoring detected 11 contaminants in Red Springs, Town of's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Red Springs, Town of's water?

EPA monitoring detected Lead, TTHM, Lead, Fluoride, Copper, and others. The full list with the level and data source for each is above.

How many people does Red Springs, Town of serve?

Red Springs, Town of reports serving 4,423 people in North Carolina, per its EPA record.

Has Red Springs, Town of had any water quality violations?

The EPA has 96 violations on file for Red Springs, Town of, of which 2 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.