Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2024-10-17 |
| TT | Health-based | Resolved | 2024-10-17 |
| MCL | Health-based | Resolved | 2011-07-01 → 2011-09-30 |
| MCL | Health-based | Resolved | 2011-04-01 → 2011-06-30 |
| MCL | Health-based | Resolved | 2011-04-01 → 2011-06-30 |
| MCL | Health-based | Resolved | 2011-04-01 → 2011-06-30 |
| MCL | Health-based | Resolved | 2011-04-01 → 2011-06-30 |
| MCL | Health-based | Resolved | 2011-04-01 → 2011-06-30 |
| MCL | Health-based | Resolved | 2011-01-01 → 2011-03-31 |
| MCL | Health-based | Resolved | 2011-01-01 → 2011-03-31 |
PFAS detected
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| TTHM | 73.825 µg/L 92% of the EPA limit 80 µg/L
worst single sample: 100 µg/L | 64/64 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 28.825 µg/L 48% of the EPA limit 60 µg/L
worst single sample: 33.4 µg/L | 64/64 | SYR4 | 2012–2019 |
| Bromodichloromethane | 18.075 µg/L No EPA limit set
worst single sample: 23.9 µg/L | 58/58 | SYR4 | 2012–2019 |
| Dibromochloromethane | 26.15 µg/L No EPA limit set
worst single sample: 33.5 µg/L | 58/58 | SYR4 | 2012–2019 |
| Chloroform | 25.08 µg/L No EPA limit set
worst single sample: 31.8 µg/L | 57/58 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 11.02 µg/L No EPA limit set
worst single sample: 12 µg/L | 57/58 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 18.625 µg/L No EPA limit set
worst single sample: 24.9 µg/L | 56/58 | SYR4 | 2012–2019 |
| Copper | 224.6 µg/L 17% of the EPA limit 1300 µg/L
worst single sample: 270 µg/L | 45/60 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 6.32 µg/L No EPA limit set
worst single sample: 7.1 µg/L | 45/58 | SYR4 | 2012–2019 |
| Bromoform | 21.36 µg/L No EPA limit set
worst single sample: 27.2 µg/L | 35/58 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 3.2 µg/L No EPA limit set
worst single sample: 4.5 µg/L | 21/58 | SYR4 | 2012–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 13/13 | LCR | 2025 |
| Monobromoacetic Acid | 1.3 µg/L No EPA limit set | 7/58 | SYR4 | 2012–2019 |
| Lead | 3.8 µg/L 25% of the EPA limit 15 µg/L | 1/60 | SYR4 | 2013–2019 |
22 contaminants tested, none detected
Utility contact
Frequently asked questions about Angier, Town of
Is Angier, Town of tap water safe to drink?
EPA monitoring detected 22 contaminants in Angier, Town of's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Angier, Town of's water?
EPA monitoring detected TTHM, Total Haloacetic Acids (HAA5), Bromodichloromethane, Dibromochloromethane, Chloroform, and others. The full list with the level and data source for each is above.
How many people does Angier, Town of serve?
Angier, Town of reports serving 13,302 people in North Carolina, per its EPA record.
Has Angier, Town of had any water quality violations?
The EPA has 49 violations on file for Angier, Town of, of which 13 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.