Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2011-07-01 → 2011-09-30 |
| MCL | Health-based | Resolved | 2011-07-01 → 2011-09-30 |
| MCL | Health-based | Resolved | 2011-07-01 → 2011-09-30 |
| MCL | Health-based | Resolved | 2011-07-01 → 2011-09-30 |
| MCL | Health-based | Resolved | 2011-07-01 → 2011-09-30 |
| MCL | Health-based | Resolved | 2008-04-01 → 2008-04-30 |
| MCL | Health-based | Resolved | 2008-04-01 → 2008-04-30 |
| MCL | Health-based | Resolved | 2008-04-01 → 2008-04-30 |
| MCL | Health-based | Resolved | 2008-04-01 → 2008-04-30 |
| MCL | Health-based | Resolved | 2004-10-01 → 2004-12-31 |
PFAS detected
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Total Haloacetic Acids (HAA5) | 44.85 µg/L 75% of the EPA limit 60 µg/L
worst single sample: 62 µg/L | 64/64 | SYR4 | 2012–2019 |
| TTHM | 65.8 µg/L 82% of the EPA limit 80 µg/L
worst single sample: 74 µg/L | 62/64 | SYR4 | 2012–2019 |
| Chloroform | 53.35 µg/L No EPA limit set
worst single sample: 65 µg/L | 54/55 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 28 µg/L No EPA limit set
worst single sample: 41 µg/L | 54/54 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 18.05 µg/L No EPA limit set
worst single sample: 21 µg/L | 54/54 | SYR4 | 2013–2019 |
| Bromodichloromethane | 12.4 µg/L No EPA limit set
worst single sample: 14 µg/L | 53/55 | SYR4 | 2013–2019 |
| Dibromochloromethane | 3.28 µg/L No EPA limit set
worst single sample: 3.8 µg/L | 45/55 | SYR4 | 2013–2019 |
| Copper | 54 µg/L 4.2% of the EPA limit 1300 µg/L
worst single sample: 68 µg/L | 41/92 | SYR4 | 2012–2018 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 10/10 | LCR | 2025 |
| Monobromoacetic Acid | 12.6 µg/L No EPA limit set
worst single sample: 13 µg/L | 5/54 | SYR4 | 2013–2019 |
| Monochloroacetic Acid | 4.9 µg/L No EPA limit set
worst single sample: 5 µg/L | 5/54 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 1.195 µg/L No EPA limit set
worst single sample: 1.2 µg/L | 2/54 | SYR4 | 2013–2019 |
| Lead | 6.45 µg/L 43% of the EPA limit 15 µg/L
worst single sample: 6.6 µg/L | 2/92 | SYR4 | 2012–2018 |
23 contaminants tested, none detected
Utility contact
Frequently asked questions about Jamestown, Town of
Is Jamestown, Town of tap water safe to drink?
EPA monitoring detected 21 contaminants in Jamestown, Town of's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Jamestown, Town of's water?
EPA monitoring detected Total Haloacetic Acids (HAA5), TTHM, Chloroform, Dichloroacetic Acid, Trichloroacetic Acid, and others. The full list with the level and data source for each is above.
How many people does Jamestown, Town of serve?
Jamestown, Town of reports serving 6,543 people in North Carolina, per its EPA record.
Has Jamestown, Town of had any water quality violations?
The EPA has 56 violations on file for Jamestown, Town of, of which 14 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.