Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2025-01-01 → 2025-03-31 |
| MCL | Health-based | Resolved | 2025-01-01 → 2025-03-31 |
| MCL | Health-based | Resolved | 2025-01-01 → 2025-03-31 |
| MCL | Health-based | Resolved | 2025-01-01 → 2025-03-31 |
| MCL | Health-based | Resolved | 2025-01-01 → 2025-03-31 |
| MCL | Health-based | Resolved | 2024-10-01 → 2024-12-31 |
| MCL | Health-based | Resolved | 2024-10-01 → 2024-12-31 |
| MCL | Health-based | Resolved | 2024-10-01 → 2024-12-31 |
| MCL | Health-based | Resolved | 2024-10-01 → 2024-12-31 |
| MCL | Health-based | Resolved | 2024-10-01 → 2024-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| TTHM | 98.39 µg/L 123% of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 141.1 µg/L | 55/55 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 74.11 µg/L 124% of the EPA limit, at the 95th percentile of samples — 60 µg/L
worst single sample: 87.8 µg/L | 55/55 | SYR4 | 2012–2019 |
| Bromodichloromethane | 12.895 µg/L No EPA limit set
worst single sample: 13.3 µg/L | 48/48 | SYR4 | 2013–2019 |
| Chloroform | 87.83 µg/L No EPA limit set
worst single sample: 128.2 µg/L | 48/48 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 34.805 µg/L No EPA limit set
worst single sample: 36.5 µg/L | 48/48 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 46.47 µg/L No EPA limit set
worst single sample: 51.3 µg/L | 48/48 | SYR4 | 2013–2019 |
| Dibromochloromethane | 2.06 µg/L No EPA limit set
worst single sample: 2.2 µg/L | 25/48 | SYR4 | 2013–2019 |
| Copper | 235 µg/L 18% of the EPA limit 1300 µg/L
worst single sample: 250 µg/L | 11/22 | SYR4 | 2014–2017 |
| Dibromoacetic Acid | 3.13 µg/L No EPA limit set
worst single sample: 3.4 µg/L | 7/48 | SYR4 | 2013–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 1/1 | LCR | 2025 |
| Lead | 2 µg/L 13% of the EPA limit 15 µg/L | 1/21 | SYR4 | 2014–2017 |
3 contaminants tested, none detected
Utility contact
Frequently asked questions about Stanly Co-Piney Point Dist
Is Stanly Co-Piney Point Dist tap water safe to drink?
EPA monitoring detected 11 contaminants in Stanly Co-Piney Point Dist's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Stanly Co-Piney Point Dist's water?
EPA monitoring detected TTHM, Total Haloacetic Acids (HAA5), Bromodichloromethane, Chloroform, Dichloroacetic Acid, and others. The full list with the level and data source for each is above.
How many people does Stanly Co-Piney Point Dist serve?
Stanly Co-Piney Point Dist reports serving 1,013 people in North Carolina, per its EPA record.
Has Stanly Co-Piney Point Dist had any water quality violations?
The EPA has 147 violations on file for Stanly Co-Piney Point Dist, of which 95 are health-based (a contaminant limit or required treatment was breached) and 4 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.