Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| Other | Monitoring | Resolved | 2001-07-01 |
| Other | Monitoring | Resolved | 2001-07-01 |
| Other | Monitoring | Resolved | 2001-07-01 |
PFAS detected
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Total Haloacetic Acids (HAA5) | 54.325 µg/L 91% of the EPA limit 60 µg/L
worst single sample: 72.1 µg/L | 126/126 | SYR4 | 2012–2019 |
| TTHM | 78.85 µg/L 99% of the EPA limit 80 µg/L
worst single sample: 104 µg/L | 124/124 | SYR4 | 2012–2019 |
| Bromodichloromethane | 12.05 µg/L No EPA limit set
worst single sample: 14 µg/L | 100/100 | SYR4 | 2013–2019 |
| Chloroform | 69.2 µg/L No EPA limit set
worst single sample: 91 µg/L | 100/100 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 28.34 µg/L No EPA limit set
worst single sample: 39.9 µg/L | 100/100 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 27.04 µg/L No EPA limit set
worst single sample: 28.3 µg/L | 97/100 | SYR4 | 2013–2019 |
| Copper | 488 µg/L 38% of the EPA limit 1300 µg/L
worst single sample: 2900 µg/L | 53/94 | SYR4 | 2014–2017 |
| Dibromochloromethane | 2.4 µg/L No EPA limit set | 41/100 | SYR4 | 2013–2019 |
| Monochloroacetic Acid | 6 µg/L No EPA limit set | 16/100 | SYR4 | 2013–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 13/13 | LCR | 2025 |
| Lead | 420 µg/L 2800% of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 730 µg/L | 11/94 | SYR4 | 2014–2017 |
| Monobromoacetic Acid | 12 µg/L No EPA limit set
worst single sample: 15 µg/L | 11/100 | SYR4 | 2013–2019 |
| Fluoride | 758 µg/L 19% of the EPA limit 4000 µg/L
worst single sample: 800 µg/L | 8/8 | SYR4 | 2012–2019 |
| Xylenes, Total | 1.5 µg/L 0% of the EPA limit 10000 µg/L | 4/8 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 28.6 µg/L No EPA limit set
worst single sample: 30 µg/L | 2/100 | SYR4 | 2013–2019 |
| Nitrate | 1000 µg/L 10% of the EPA limit 10000 µg/L | 2/16 | SYR4 | 2012–2019 |
88 contaminants tested, none detected
Utility contact
Frequently asked questions about Lincolnton, City of
Is Lincolnton, City of tap water safe to drink?
EPA monitoring detected 20 contaminants in Lincolnton, City of's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Lincolnton, City of's water?
EPA monitoring detected Total Haloacetic Acids (HAA5), TTHM, Bromodichloromethane, Chloroform, Dichloroacetic Acid, and others. The full list with the level and data source for each is above.
How many people does Lincolnton, City of serve?
Lincolnton, City of reports serving 16,309 people in North Carolina, per its EPA record.
Has Lincolnton, City of had any water quality violations?
The EPA has 3 violations on file for Lincolnton, City of, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.