Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2024-10-17 |
| TT | Health-based | Resolved | 2024-10-17 |
| MCL | Health-based | Resolved | 2004-10-01 → 2004-12-31 |
| MCL | Health-based | Resolved | 2004-10-01 → 2004-12-31 |
| MCL | Health-based | Resolved | 2004-10-01 → 2004-12-31 |
| MCL | Health-based | Resolved | 2004-10-01 → 2004-12-31 |
| MCL | Health-based | Resolved | 1997-07-01 → 1997-07-31 |
| MCL | Health-based | Archived | 1994-01-01 → 1994-12-31 |
| MCL | Health-based | Archived | 1994-01-01 → 1994-12-31 |
| MCL | Health-based | Archived | 1994-01-01 → 1994-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 180 µg/L 14% of the EPA limit 1300 µg/L
worst single sample: 230 µg/L | 21/51 | SYR4 | 2012–2017 |
| TTHM | 68.4 µg/L 86% of the EPA limit 80 µg/L
worst single sample: 78 µg/L | 16/16 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 70.02 µg/L 117% of the EPA limit, at the 95th percentile of samples — 60 µg/L
worst single sample: 78 µg/L | 15/16 | SYR4 | 2012–2019 |
| Bromodichloromethane | 22.8635 µg/L No EPA limit set
worst single sample: 25.21 µg/L | 14/14 | SYR4 | 2014–2019 |
| Chloroform | 49.44 µg/L No EPA limit set
worst single sample: 52.3 µg/L | 14/14 | SYR4 | 2014–2019 |
| Dichloroacetic Acid | 21.94 µg/L No EPA limit set
worst single sample: 23.5 µg/L | 14/14 | SYR4 | 2014–2019 |
| Trichloroacetic Acid | 30.36 µg/L No EPA limit set
worst single sample: 43.1 µg/L | 14/14 | SYR4 | 2014–2019 |
| Dibromochloromethane | 21.932 µg/L No EPA limit set
worst single sample: 24 µg/L | 12/14 | SYR4 | 2014–2019 |
| Dibromoacetic Acid | 7.55 µg/L No EPA limit set
worst single sample: 7.8 µg/L | 6/14 | SYR4 | 2014–2019 |
| Bromoform | 13.0285 µg/L No EPA limit set
worst single sample: 14.41 µg/L | 4/14 | SYR4 | 2014–2019 |
| Monobromoacetic Acid | 2 µg/L No EPA limit set | 2/14 | SYR4 | 2014–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 1/1 | LCR | 2025 |
| Lead | 3 µg/L 20% of the EPA limit 15 µg/L | 1/51 | SYR4 | 2012–2017 |
| Monochloroacetic Acid | 8 µg/L No EPA limit set | 1/14 | SYR4 | 2014–2019 |
Utility contact
Frequently asked questions about Skyview Park
Is Skyview Park tap water safe to drink?
EPA monitoring detected 14 contaminants in Skyview Park's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Skyview Park's water?
EPA monitoring detected Copper, TTHM, Total Haloacetic Acids (HAA5), Bromodichloromethane, Chloroform, and others. The full list with the level and data source for each is above.
How many people does Skyview Park serve?
Skyview Park reports serving 158 people in North Carolina, per its EPA record.
Has Skyview Park had any water quality violations?
The EPA has 543 violations on file for Skyview Park, of which 23 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.