Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2008-03-01 → 2008-03-31 |
| TT | Health-based | Resolved | 2008-03-01 → 2008-03-31 |
| TT | Health-based | Resolved | 2008-03-01 → 2008-03-31 |
| TT | Health-based | Resolved | 2008-03-01 → 2008-03-31 |
| TT | Health-based | Resolved | 1992-01-01 → 1994-05-15 |
| TT | Health-based | Resolved | 1992-01-01 → 1994-05-15 |
| MR | Monitoring | Addressed | 2026-04-01 → 2026-06-30 |
| MR | Monitoring | Addressed | 2026-04-01 → 2026-06-30 |
| MR | Monitoring | Addressed | 2026-04-01 → 2026-06-30 |
| MR | Monitoring | Addressed | 2026-04-01 → 2026-06-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| TTHM | 68.965 µg/L 86% of the EPA limit 80 µg/L
worst single sample: 108.4 µg/L | 128/128 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 45.975 µg/L 77% of the EPA limit 60 µg/L
worst single sample: 60.2 µg/L | 126/126 | SYR4 | 2012–2019 |
| Chloroform | 62.39 µg/L No EPA limit set
worst single sample: 101.3 µg/L | 100/100 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 19.05 µg/L No EPA limit set
worst single sample: 24 µg/L | 100/100 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 27.035 µg/L No EPA limit set
worst single sample: 36.7 µg/L | 100/100 | SYR4 | 2013–2019 |
| Bromodichloromethane | 7.025 µg/L No EPA limit set
worst single sample: 8.8 µg/L | 96/100 | SYR4 | 2013–2019 |
| Copper | 101 µg/L 7.8% of the EPA limit 1300 µg/L
worst single sample: 144 µg/L | 31/90 | SYR4 | 2013–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 15/15 | LCR | 2025 |
| Fluoride | 888.2 µg/L 22% of the EPA limit 4000 µg/L
worst single sample: 890 µg/L | 7/8 | SYR4 | 2012–2019 |
| Lead | 8.8 µg/L 59% of the EPA limit 15 µg/L
worst single sample: 9 µg/L | 5/90 | SYR4 | 2013–2019 |
| Dibromochloromethane | 1 µg/L No EPA limit set | 4/100 | SYR4 | 2013–2019 |
| Combined Radium (-226 And -228) | 1 pCi/L 20% of the EPA limit 5 pCi/L | 1/2 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 1.1 µg/L No EPA limit set | 1/100 | SYR4 | 2013–2019 |
94 contaminants tested, none detected
Utility contact
Frequently asked questions about Morganton City of
Is Morganton City of tap water safe to drink?
EPA monitoring detected 13 contaminants in Morganton City of's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Morganton City of's water?
EPA monitoring detected TTHM, Total Haloacetic Acids (HAA5), Chloroform, Dichloroacetic Acid, Trichloroacetic Acid, and others. The full list with the level and data source for each is above.
How many people does Morganton City of serve?
Morganton City of reports serving 27,221 people in North Carolina, per its EPA record.
Has Morganton City of had any water quality violations?
The EPA has 37 violations on file for Morganton City of, of which 6 are health-based (a contaminant limit or required treatment was breached) and 6 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.