Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Unaddressed | 2024-10-17 |
| MCL | Health-based | Resolved | 2005-07-01 → 2005-09-30 |
| MCL | Health-based | Resolved | 2005-07-01 → 2005-09-30 |
| MCL | Health-based | Resolved | 2005-07-01 → 2005-09-30 |
| MCL | Health-based | Resolved | 2005-07-01 → 2005-09-30 |
| MCL | Health-based | Resolved | 1999-04-01 → 1999-04-30 |
| MCL | Health-based | Resolved | 1999-04-01 → 1999-04-30 |
| MCL | Health-based | Resolved | 1999-04-01 → 1999-04-30 |
| MCL | Health-based | Resolved | 1999-01-01 → 1999-03-31 |
| MCL | Health-based | Resolved | 1999-01-01 → 1999-03-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Dibromochloromethane | 4.08 µg/L No EPA limit set
worst single sample: 4.3 µg/L | 3/5 | SYR4 | 2013–2019 |
| Fluoride | 561 µg/L 14% of the EPA limit 4000 µg/L
worst single sample: 570 µg/L | 3/3 | SYR4 | 2013–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 3/3 | LCR | 2025 |
| TTHM | 10.3 µg/L 13% of the EPA limit 80 µg/L
worst single sample: 11 µg/L | 3/5 | SYR4 | 2013–2019 |
| Bromodichloromethane | 2.06 µg/L No EPA limit set
worst single sample: 2.1 µg/L | 2/5 | SYR4 | 2013–2019 |
| Bromoform | 3.135 µg/L No EPA limit set
worst single sample: 3.2 µg/L | 2/5 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 2.535 µg/L No EPA limit set
worst single sample: 2.6 µg/L | 2/5 | SYR4 | 2013–2019 |
| Lead | 8.9 µg/L 59% of the EPA limit 15 µg/L
worst single sample: 9 µg/L | 2/20 | SYR4 | 2012–2018 |
| Total Haloacetic Acids (HAA5) | 3.485 µg/L 5.8% of the EPA limit 60 µg/L
worst single sample: 3.6 µg/L | 2/5 | SYR4 | 2013–2019 |
| Barium | 35 µg/L 1.8% of the EPA limit 2000 µg/L | 1/3 | SYR4 | 2013–2019 |
| Copper | 50 µg/L 3.8% of the EPA limit 1300 µg/L | 1/20 | SYR4 | 2012–2018 |
| Chloroform | 1 µg/L No EPA limit set | 1/5 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 1 µg/L No EPA limit set | 1/5 | SYR4 | 2013–2019 |
63 contaminants tested, none detected
Utility contact
Frequently asked questions about Northview Mhp
Is Northview Mhp tap water safe to drink?
EPA monitoring detected 13 contaminants in Northview Mhp's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Northview Mhp's water?
EPA monitoring detected Dibromochloromethane, Fluoride, Lead, TTHM, Bromodichloromethane, and others. The full list with the level and data source for each is above.
How many people does Northview Mhp serve?
Northview Mhp reports serving 516 people in North Carolina, per its EPA record.
Has Northview Mhp had any water quality violations?
The EPA has 578 violations on file for Northview Mhp, of which 19 are health-based (a contaminant limit or required treatment was breached) and 11 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.